Quick-release connector 13mm barbed connector (1/2) plug incl. bulkhead thread - black nickel [0]

The new generation has been developed especially for high-flow systems. These couplings have great quality and practicality, as you would expect at Aquatuning. The "Papa" and "Mama Pieces" are each provided with a punch, but they are designed to not cant, is possible with separate and thus seals the system to 100%. When connected additionally a silicone seal on the inner wall of the "Mama track" that also provides the best seal possible. To avoid any loosening when in use the connection, be by means of a rotational movement of the two pieces are connected which are not to separate them with extreme force.

The opposite side is provided hose connection with a 13mm, which further increases the application range yet!

Technical details:
Material: Nickel plated brass
Overall length: 51mm
Width: 20 mm
Hose connection: 13mm (1/2 ") (For tubes with einem13mm inner diameter)

Delivery:
1x quick coupling 13mm (1/2 ") plug including bulkhead -. Black nickel
1x spring band hose clamp

Important note Regarding use of the connectors:
To Ensure a tight seal between coupling and plug the units are designed for a very tight fit. When Repeatedly plugging the connectors in and out, this may lead to roughening of the O-ring or even tearing of the gasket. Hence the gaskets shoulderstand always be kept moist When plugging the connection in or out! A torn gasket is not covered by the warranty but is rather Caused by incorrect use of the unit. Spare O-rings can be ordered with the item number 95,002th

Note: For operation of the coupling the male counterpart is required.
                 These connectors are also compatible with the Koolance VL3.

Info: Not entirely leak-free (that is, after separation still flow 1-2 drops).

Various quick couplings compared with Aquainfos

Overview:
10mm (3/8 ") hose clamp: up to 8mm none, from 10mm required
10mm (7/16 ") hose clamp: up to 8mm none, from 10mm required
12mm (1/2 ") hose clamp: up to 11mm none, from 12mm required
13mm (1/2 ") hose clamp: up to 11mm none, from 13mm up required