Phobya LED Flexlight LowDensity 60cm RGB (18x SMD LEDs) [0]

With the use of the Phobya Flexlight strip it is now possible to shine a light into every corner of your enclosure with even more LEDs! The 4-Pin Molex extension loops through the required energy and hence still allows use of the PSU connector. For mounting the pre-applied adhesive tape at the back of the strips. Hence mounting of the Flexlights is easy to do in any spot in the enclosure. 

Many possibilities allow many different lighting effects: At the in- or outside of the enclosure, wrapped around the reservoir or simply put at the base of the enclosure. Thanks to the LED technology the Flexlights have an extremely low power consumption and barely any heat dissipation. Additionally the Flexlight strip is watertight, giving many new possibilities in combination with a water cooling system. The Flexlights can even be hung into a reservoir for a completely new look!
The great quality of manufacturing and advanced technology makes Flexlights the ultimate lighting solution!

Of course shortening of the Flexlight strips is possible without problems, simply cut them to the desired length! Please note that the cut should only be made at the cut marks (every third LED), as the last LEDs will not functions otherwise. Even extension is possible for users with soldering experience. This even allows combination of Flexlights in different colours!

New generation: 
The combination of the TriBright technology in combination with the closely spaced high-density LEDs allows extreme lighting power! Beautifully black sleeved allow this component to be integrated cleanly into high-end systems.

Flexlights outside of the PC? 
Of course! Use Flexlights to illuminate a table from the bottom, a couch from the rear or even a photo frame! All of these beautiful possibilities can be realized with the Phobya external power supplies: No PC is required, no noisy fans are disturbing the silence. Simply order one of the Phobya PSUs (Item No. 84006 or 84011) and enter the world of endless lighting possibilities!

RGB
These three letters stand for red, green and blue. With these base colour LEDs virtually all colours of the rainbow can be mixed. With the right controller unit (not included, optionally available with the Item No. 83156) even more effects can be achieved. More details can be found in the item description of the Phobya LED Flexlight RGB controller and remote control.

Technical specifications: 
Length: 60cm
Colour: RGB
Width: 10mm (strip only)
Number of LEDs: 18
Voltage: 12VDC to 14VDC

Control only possible with Item No. 83156

Extent of delivery: 
1x Phobya LED-Flexlight LowDensity 60cm RGB (18x SMD LED)