Phanteks Glacier C360i CPU water cooler, DRGB, acrylic [PH-C360I_01]

As used to the Dutch, only the best materials are used so the C360i sets quality standards again!

The features of the PHANTEKS C360i CPU water cooler at a glance:
- Extremely stylish design with RGB LEDs
- Nickel plated copper cooler with special lamella design
- Interchangeable covers in black or silver
- Integrated digitally addressable RGB LED lighting
- O-ring seal made of extremely resistant Viton
- Mounting Kits for Intel Socket LGA 2011 (-V3) & LGA 115x
- Including backplate for a stable installation

The PHANTEKS C360i CPU Water Cooler - Absolute Performance Meets RGB Lighting!
With its first CPU water cooler PHANTEKS sets new standards and catapults the C360i directly into the top class. A base plate of nickel-plated copper forms the base of the CPU mono block and on the top 0.4 mm wide and 4 mm high fins provide optimal transfer of heat from the bottom plate to the coolant.

The lid, made of polished, clear acrylic glass, is attached to the bottom plate using a Viton O-ring. Viton has particularly high thermal and chemical resistance and is used, among others, in the aerospace and automotive industries for the sealing of fuel tanks. In addition, there are two covers for the lid, each in silver and black.

The top of the acrylic cover has G1 / 4-inch fittings and four RGB LEDs. The LED strips are concealed by the two replaceable chrome-plated aluminum or black acetal covers, and on the right side of the mono block are the two lighting connections.

The digitally addressable RGB LED lighting can be connected via adapter cables for controller hubs in PHANTEKS housings equipped with them or via the common 3-pin connector of a mainboard. The RGB LEDs are compatible with motherboards that have ASUS Aura Sync, Gigabyte's RGB Fusion 2.0, ASRock's Polychrome Sync, Razer's Chroma, or MSI's Mystic Light Sync feature.

The assembly is done with the stable backplate, the Intel Socket 115x and 2011 (-V3) are supported by the house. The installation is very convenient and all necessary for attachment to the motherboard screws and backplates are included. In addition, the thermal grease from PHANTEKS is included.

Note: This product will be delivered without the necessary connections. These must therefore be purchased separately.

Technical details:
- Dimensions CPU cooler: 90 x 18.4 x 90 mm (W x H x D)
- Weight: approx. 206 g
- Material: copper (bottom, nickel-plated), acrylic glass (cover), chrome-plated aluminum (cover)
- Connections: 2x G1 / 4-inch thread
- LED lighting: digitally addressable RGB, 5VDG, 4x LEDs
Socket compatibility:
- Intel: 1150, 1151, 1155, 1156, 2011 (-V3)
- Thermal paste: PHANTEKS PH-NDC
Delivery:
- 1x CPU cooler
- 1x thermal grease
- 2x cover plate, 1x black, 1x silver
- 1x backplate
- 1x RGB LED strip set
- 1x RGB LED adapter for PHANTEKS enclosures and motherboards
- 1x mounting kit

Attention: Please note that some coolers come with a protective foil on the underside. This must always be removed before installation and commissioning. We assume no liability for damage due to incorrect or incorrect installation and improper use!