Phanteks Enthoo Evolv ITX Mini-ITX Case - Black [PH-ES215PC_BK]

Overview

Phanteks stands for innovation, quality and uniqueness - a reputation that the young company has achieved in a short time. With its cool and strong, specially coated processor coolers and excellent fans, both in terms of smoothness and flow rate. And in terms of design you sat with new shapes and colors much joy accents. With the luxury Big-Tower Primo, the Dutch not only presented the first representatives of their Enthoo series, but also her first computer case at all.

The Phanteks Enthoo Primo could convince away with its distinctive elegant design, the massive features and its overwhelming support for internal water cooling from the spot, but still remained a prohibitive hardware treasure for many.

0/5 | 0 Reviews | Write your Review

Stock, Shipping & Collection Options

Out Of Stock

FREE UK/EU DELIVERY over £500+

Collection is currently unavailable

SKU: GEPH-024

MPN: PH-ES215PC_BK

EAN: 886523300434

Warranty: 12 Months

This product is currently out of stock or EOL, please contact us for an ETA.

Check your hardware compatibility here

Details

As for the classic and timeless, yet sophisticated design, is at first sight clear that the Enthoo Evolv has stood for the Evolv ITX Pate, the dimensions were only minimally altered so that the Enthoo Evolv ITX although as wide (23 cm) and almost as deep (39.5 cm) as the great, little brother goes down, but because of the canceled compatibility with the Micro-ATX form factor 75 mm less high (37.5 cm). The body inside there as well as the side panels in black painted steel, the detachable front panel is made of plastic, but carries a large powder-coated decorative plate steel. Below sits a narrow strip of light that glows white when switched on. Air intakes for cooling were discreetly integrated into the black areas, so as not to disturb the minimalist look.

It waits behind the front panel a factory installed 200 mm fan on the use and at the rear is an additional optional 140s or 120s mounted. Front and power supply slot in the floor are equipped with removable dust filters. More fans in 140 or 120 mm can stay in the cover of Evolv. Alternatively, also a 280-mm or 240-mm heat exchanger with 54 mm (140mm width) and 74 mm (120-width) are attached to the motherboard tray place (please RAM height!), Which can be installed on a side pull-out bracket. This can lead to no clashes with inserted RAM modules when installing a Radis. In the absence of the 200-fan in the front there is a 240mm radiator is also possible.

Fortunately waived Phanteks not even the small Enthoo Evolv ITX on the known watercooling features of the great Enthoo spending. So is directly above the hidden HDD cage for two 3.5-inch hard disk drives (SSDs or small) a multifunctional bracket with "Phanteks" lettering. While up to long to 33 cm graphics cards possibly disappear behind it, on top of the bracket several options are available: either fixed only the included universal tube reservoir holder or placing here of optional accessories such as SSD mounting frame for 1 or 2 additional 2.5-inch drives (GEPH-009 or GEPH-010), a HDD support (GEPH-018) or the Phanteks-pump bracket (GEPH-008).

On the back of the Mini-ITX trays, where stately 28 mm space for ordinary cable laying invite is also room for the available PWM fan hub (LULs-239) of Phanteks that the automatically controlled operation of up to eight 3- Pin allows fans over a single 4-pin PWM connector of the mITX motherboard. Forward up a 2.5-inch bracket with "Drop-n-Lock" mechanism for a small 2.5-inch Drive is already available from the factory. The entire lower portion of the Evolv ITX is an up to 21.2 cm long ATX power supply as well as the double-HDD Cage reserved. Which may incidentally soft and the optional pump bracket (GEPH-008), the customer can therefore use at the same time the enclosed Terms mounting on the multi-function bracket and the additional pump bracket in the front floor if it only a single silent SSD with entsprchend high capacity required as a system drive.

Technical details:

    Dimensions: 230 x 375 x 395 mm (W x H x D)
    Weight: 5.4 kg
    Material: Steel (Body, sides, decorative plate on the front panel), plastic (front panel)
    Color: Black
    Form Factor: Mini-ITX
    Fan total possible:
    1x 200 / 2x 140/120 mm (front)
    1x 140/120 mm (rear)
    2x 140/120 mm (cover)
    Of this pre-installed:
    1x 200 mm (front)
    Radiator Mountings (partial waiver of HDD and / or fan-Slots)
    1x max. 240 mm (front)
    1x max. 140/120 mm (rear)
    1x max. 280/240 mm (lid) *
    * Distance from the motherboard tray at 120 Format: 54 mm
    * Distance from the motherboard tray in a 140 Format: 74 mm
    Please note possible maximum amount of memory!
    Filters: front, power supply (removable)
    Drive Bays:
    2x 3.5 inch (internal, tools, decoupled + 1x optionally via the optionally available HDD-Bracket GEPH-018)
    3x 2.5 inch (internal, 2x instead of 3.5 inches; 1x per SSD bracket behind the motherboard tray with "Drop-n-Lock" + 1x or 2x optional via the optionally available SSD bracket GEPH-009 or GEPH -010)
    Power supply: 1x Standard ATX (optional)
    Expansion Slots: 2
    I / O Panel:
    2x USB 3.0 (internal links)
    1x per Audio In / Out
    Maximum video card length: 330 mm
    Maximum CPU cooler height: 200 mm
    Maximum power supply Length: 212 mm (with HDD cage)