Phanteks Eclipse P400S midi tower, white - insulated [PH-EC416PSC_WT]

With a through RGB LEDs illuminated power button and a "Ambient downlight", an LED strip on the lower front, illuminates the area around the Eclipse Towers in ten selectable colors, the Dutch set as usual colorful accents! The housing of the Eclipse P400 series are available in different colors, for example, Black, white or anthracite, available at any available color variation there is a version with or without window. In addition to the color and window variants Eclipse housing already are also available from the factory built housing insulation, which can be found under the name Eclipse P400S.

The offered here white Eclipse P400S midi tower from the Phanteks Eclipse series convinced already optically with its clean lines and the noble, more restrained style. The one-piece front cover gives the case a very classy look, which is enhanced by the external LED lighting on the lower front even further. The illuminated by LEDs  "Phanteks" - writing under the lower air intake gives the midi tower that certain something ?? and the fins on the top front, which also serve to ventilate, offer a well liked contrast to the simplicity of the bezel.
 

are the reset switch, the fan control and the LED control, which was positioned in the notch between the lid and the upper air intake in the front on the edge between front and lid. Centrally in the front region of the cover is of backlit with RGB LED power button, while the two audio ports and the two USB 3.0 ports on the front  - were placed Panel offset to the right side. The majority of the lid occupies a large, removable dust filter, which acts as a large mesh screen and rests on a large ventilation grille.

Technical details:
- Dimensions: 210 x 495 x 470 mm (W x H x D)
- Weight: approx 7.5 kg
- Material: steel, plastic
- Color white
- Form Factor: E-ATX (up to 272 mm wide), ATX, Micro-ATX, Mini-ITX
Fan total possible:
- 2x 140 / 3x 120 mm (front)
- 2x 140/120 mm (cover)
- 1x 120 mm (rear)
Of preinstalled:
- 1x 120 mm (front)
- 1x 120 mm (rear)
- Radiator Mountings (partial waiving HDD and / or fan slots):
- 1x max. 280/360 mm (front)
- 1x max. 120 mm (rear)
- Filter: Front, Power Supply, cover (removable)
Drive Bays:
- 2x 2.5 inch (internal; tool-free installation)
- 2x 3.5 inch (internal; tool-free installation)
- PSU 1x standard ATX (optional)
- Expansion Slots: 7
I / O panel:
- 1x Power button (with RGB LED)
- 1x LED controller
- 2x USB 3.0
- 1x fan control (3-step-wise, for 2 fans)
- 2x Audio
- Maximum video card length: 395 mm
- Maximum CPU cooler height: 160 mm
- Maximum power supply Length: 270 mm