Phanteks Eclipse P400S Midi-Tower, anthracite - insulated [PH-EC416PSC_AG]

With a through RGB LEDs illuminated power button and a "Ambient downlight", an LED strip on the lower front, illuminates the area around the Eclipse Towers in ten selectable colors, the Dutch set as usual colorful accents! The housing of the Eclipse P400 series are available in different colors, for example, Black, white or anthracite, available at any available color variation there is a version with or without window. In addition to the color and window variants Eclipse housing already are also available from the factory built housing insulation, which can be found under the name Eclipse P400S. The offered here anthracite gray Eclipse P400S midi tower from the Phanteks Eclipse series convinced already optically with its clean lines and the noble, more restrained style. The one-piece front cover gives the case a very classy look, which is enhanced by the external LED lighting on the lower front even further. The illuminated by LEDs ?? Phanteks ?? - writing under the lower air intake gives the midi tower that certain something ?? ?? and the fins on the top front, which also serve to ventilate, offer a well liked contrast to the simplicity of the bezel.
 

are the reset switch, the fan control and the LED control, which was positioned in the notch between the lid and the upper air intake in the front on the edge between front and lid. Centrally in the front region of the cover is of backlit with RGB LED power button, while the two audio ports and the two USB 3.0 ports on the front ?? ?? - were placed Panel offset to the right side. The majority of the lid occupies a large, removable dust filter, which acts as a large mesh screen and rests on a large ventilation grille.
 

Insulated midi tower: Ideal for Silent gaming PCs

The Eclipse P400S midi tower was equipped by Phanteks but working with insulating mats to reduce noise. Both sides have been fully provided with material for insulation, similar to the insulated front, only the cover makes an exception. So come on the cover two square 140 mm Dämmplättchen used, which are placed on top of the ventilation grille. If one, or both, of its two fan slots occupied by a fan, can be fitted in place of the insulating boards one or two square dust filter.

Medium housing for gaming graphics cards & AiO watercooling
 

The interior of the anthracite-gray Eclipse P400S acts thanks to the black paint very precious and is divided by a power supply with cover grille on the top into two parts. The PSU Shroud hides the two rotated by 90 ° drive bays that allow a tool-less installation of two 3.5-inch HDDs on the right wing, to remove the attached via thumb screws side panel. Behind the motherboard tray, up to two SSDs in ?? Drop-N-Lock ?? - SSD brackets are mounted and for cable management remain 25 mm square. Velcro cable fasteners enabling a clean installation of the cable and rubber bushings in the tray protect the cables used.
 

For gamers and hardcore gamers the Phanteks Eclipse provides P400 installation options for high-end gamer hardware in the form of up to 395 mm long graphics cards and radiator Mountings for AiO Water Cooling and custom water cooling. So has the case in the back of mounting options for a 120-mm fan or corresponding radiator, while the front can accommodate three 120 fans or two 140s fan. As an alternative to the front fans can 280s or 360s heat exchangers are installed in the front. However, a cover in the PSU Shroud and the cages must be removed for the HDDs for the installation of a 360-mm radiator. Apart from the two pre-installed 120 mm fans, one each in the front and one in the back, up to two 120s or 140s case fans can each be mounted in the lid.
 

Those who want to curb its processor with a regular CPU cooler, may use an up to 16 cm high model, while up to 270 mm long power supply may provide the gaming system with the required power. The LED lighting is supplied via a SATA cable with 12 V voltage and a 4-pin connector, the LED lighting of the housing to an optional LED control or a motherboard with an appropriate RGB connector can be connected. With the help of optional accessories can be installed at the expense of the maximum length of the video card and on waiver of a radiator in the front up to four additional 3.5-inch disk.
 

Compatible Motherboards with ASUS Aura RGB Strip header and RGB LEDs

Thanks to the ingenious Phanteks RGB LED adapter cable (click here) can be motherboards from ASUS with integrated ASUS Aura extended RGB LED lighting and other models 12V GRB headers with the built-in (or via Phanteks RGB LED Strips or retrofitted) RGB LED lighting in Phanteks enclosures series Enthoo Luxe, Enthoo Mini XL and Eclipse P400 (S) together in all versions (Standard, Window, Insulated) and colors. The benefit is that the aura mainboard lighting may be controlled via the practical ASUS ROG Aura software with the respective cabinet lighting, making the entire gaming PC is uniformly illuminated as desired and can display the same LED Effects.

free RGB adapter cable for owners of compatible products: For a limited time
 

Who has acquired both a compatible ASUS motherboard with Aura RGB header and any of the above Phanteks housing with integrated RGB lighting already before 1 March 2016 may apply within a limited period directly from Phanteks a free RGB LED adapter cable , The free-running action for a short time, with no fixed end date exists, therefore, applies as always: quick strike, while stocks last! The decision is final.

Click here for the promotion request directly Phanteks (external link)

Dimensions: 210 x 495 x 470 mm (W x H x D)

Weight: approx 7.5 kg

Material: steel, plastic

Colour: anthracite gray

Form Factor: E-ATX (up to 272 mm wide), ATX, Micro-ATX, Mini-ITX

Fan total possible:

2x 140 / 3x 120 mm (front)

2x 140/120 mm (cover)

1x 120 mm (rear)

Of preinstalled:

1x 120 mm (front)

1x 120 mm (rear)

Radiator Mountings (partial waiving HDD and / or fan slots):

1x max. 280/360 mm (front)

1x max. 120 mm (rear)

Filter: Front, Power Supply, cover (removable)

Drive Bays:

2x 2.5 inch (internal; tool-free installation)

2x 3.5 inch (internal; tool-free installation)

PSU 1x standard ATX (optional)

Expansion Slots: 7

I / O panel:

1x Power button (with RGB LED)

1x LED controller

1x fan control (3-step-wise, for 2 fans)

2x USB 3.0

2x Audio

Maximum video card length: 395 mm

Maximum CPU cooler height: 160 mm

Maximum power supply Length: 270 mm