The D-RGB fans of the SK series are equipped with digitally addressable RGB lighting. The fans are available in sizes of 120 and 140 millimeters. Thanks to the rubber dampers, these fans are pleasantly quiet even at high speeds.
The features of the PHANTEKS SK PWM D-RGB set of 3 (140 mm) at a glance:
- Three black case fans with white rotor blades
- Digitally addressable RGB lighting with 12 LEDs each
- PWM controlled speed range from 500 to 1500 rpm
- Including rubber vibration dampers
- Durable rifle warehouse (40,000 hours)
- High delivery volume of 143.56 m³ / h
PHANTEKS SK PWM D-RGB: High-performance and smooth-running case fan with RGB
The PHANTEKS SK PWM D-RGB is a high-performance 140 mm fan that was developed for use as a case fan. Nine rotor blades ensure a delivery volume of 143.56 m³ / h and a static pressure of 0.96 mm H2O. The fan is controlled by a PWM signal in a speed range from 500 to 1500 revolutions per minute.
At maximum speed, the PHANTEKS SK PWM D-RGB generates a maximum volume of 36 dB (A). The smooth-running rifle bearing and the vibration dampers made of rubber ensure that no vibrations are transmitted to the housing. The fan comes with four screws for attaching to the case and eight rubber dampers.
The PHANTEKS SK PWM D-RGB has a black frame and milky-white fan blades. The digitally addressable RGB lighting consists of twelve RGB LEDs, which are located in the rotor hub and emit outwards from the center of the fan, with the rotor blades serving as a diffuser. The RGB connection cable has an integrated Y-switch to connect several D-RGB products from PHANTEKS in series.
The set offered here contains three 140 millimeter fans, including fastening screws and rubber dampers. In addition, a Y-cable with three connections for the PWM signal of the fans and an adapter cable are included, which converts PHANTEKS 'own 3-pin RGB connector into the usual 3-pin RGB connector.
Note: PHANTEKS uses its own connection for digitally addressable RGB lighting. An adapter cable is included in the scope of delivery of the fan sets, which enables connection to standard 3-pin RGB headers. To integrate a single fan into an existing ecosystem without a PHANTEKS RGB controller, a separately available adapter cable (item no .: ZUAD-1107) is required.
- Number of fans: 3
- Dimensions: 140 x 140 x 25 mm (W x H x D)
- Material: plastic, rubber
- Color: black (frame), white (fan blades)
- Volume: max. 36 dB (A)
- Speed: 500 - 1500 rpm
- Delivery volume: 143.56 m³ / h
- Air pressure: 0.96 mm H2O
- Illumination: RGB
- Number of LEDs: 12
- Operating voltage: 4 - 13 V
- Power consumption: max. 2.64 W.
- 4-pin PWM
-PHANTEKS RGB (3-pin)
- Cable lengths:
- 550 mm (power consumption
- 300 mm + 100 mm (RGB + Y-switch)
- MTBF: 40,000 hours
- Scope of delivery:
- 3x 140 mm PHANTEKS SK PWM D-RGB fans
- 12x fastening screws
- 24x rubber dampers
- 1x RGB adapter cable
- 1x PWM-Y cable (1 to 3)
- Manufacturer guarantee: 2 years