PHANTEKS Evolv Shift XT iTX Case, ARGB, Tempered Glass - silver [PH-ES121XT_DGS01]

- Side panels with fine air intakes, even for fanless setups
- Expandable up to 60 mm upwards for 2x 140 fans or 240 mm AiOs
- Space for graphics cards up to 3 slots height and 324 mm length
- Vertical installation of the graphics card with integrated PCIe 4.0 riser cable
- Evolv Shift XT: Noble PC case for the living room

The PHANTEKS Evolv Shift XT continues the striking design of the Evolv series and combines it with new, innovative features to create a particularly eye-catching Mini-ITX case. The Evolv Shift XT cuts a fine figure in any setup with its aluminum surfaces and fine air intakes. The case in the SFF form factor takes up a very small footprint, but thanks to its flexible layout, it can accommodate powerful gaming hardware in the cleverly designed interior.

In each of the three configurations, the Evolv Shift XT offers space for large gaming graphics cards up to 324 mm long and CPU air or water coolers up to a height of 72 mm. This gives you a lot of flexibility in choosing the hardware you want to install. The Evolv Shift XT gives you the choice of creating a chic living room or multimedia PC, a powerful work computer or a sophisticated gaming PC.
Plenty of cooling options in a sophisticated layout

If you need extra cooling for your powerful hardware, you can raise the lid by two levels to accommodate active cooling.

PHANTEKS Evolv Shift XT
Compact configuration with 211mm height
In the basic configuration, a CPU air cooler up to 72 mm high and the fans of the graphics card provide cooling. Fresh air reaches the components from all sides.
Cooling with fresh air from the outside

13.5 l total volume
CPU air cooler up to 72mm height, graphics cards up to 324mm length

PHANTEKS Evolv Shift XT
Air Boost configuration with 244mm height
If the lid is raised by one step, two 120mm or 140mm fans can be attached to the integrated bracket. They may be up to 30mm high.
More airflow thanks to two 120mm or 140mm fans
15.6 l total volume
CPU air cooler up to 72mm height, graphics cards up to 324mm length

PHANTEKS Evolv Shift XT
Liquid cooling configuration with 272mm height
Alternatively, the lid can be raised further to install a 240 mm radiator of an AiO with fan. The radiator and fan may be 315 x 150 x 60 mm (L x W x H) in size.
Space for a 240mm radiator at the top
17.4 l total volume
CPU air cooler up to 72mm height, graphics cards up to 324mm length

Easy to install, easy to maintain
PHANTEKS makes it particularly easy for you to build your dream PC with the Evolv Shift XT. All side panels, the front and the lid as well as the front can be removed. The bracket for fan or radiator can be folded up or completely removed for maintenance work. This allows the desired hardware to be installed quickly and easily on the scaffolding. Even the supplied Riser PCIe 4.0 cable is already laid. A lock ensures that the cable does not slip out of the graphics card when laying further cables. For cable management, there are well-placed brackets and straps with Velcro fasteners.

The hardware is powered by an SFX or SFX-L power supply, which is mounted next to the motherboard. Especially when using an SFX-L power supply, you should use one with modular cables because of the limited space. The cable harnesses point upwards, the connection for the power plug downwards. The power cord can be guided outwards under the housing. A 2.5-inch drive can be installed on a bracket under the graphics card.

Chic design and plenty of connections
As usual with PHANTEKS and especially with the Evolv series, the Evolv Shift XT makes a good visual impression. The side panels made of high-quality aluminum are complemented by a chic front made of tempered glass. The higher the housing configuration, the more an RGB-illuminated infinity mirror comes to light behind it. Thanks to the integrated controller, the lighting can be controlled either via a motherboard with 3-pin ARGB connector or directly on the I/O panel. For this purpose, a switch for different modes and another for the color selection is available.

In addition to the RGB control, there is a USB 3.0 Type A port on the I/O panel, as well as a USB 3.1 Type-C port and a power switch. The PHANTEKS Evolv Shift XT offers many features and above all the flexibility to allow you to build your optimal PC.

Specifications:
Dimension:
Basic configuration: 173 x 211 x 371 mm (W x H x D)
Configuration for fans: 173 x 244 x 371 mm (W x H x D)
Configuration for AiO: 173 x 272 x 371 mm (W x H x D)
Volume:
Basic configuration: 13.5L
Configuration for fans: 15.6 l
Configuration for AiO: 17.4 l
Weight: 4.2kg
Material: steel, aluminium, tempered glass, plastic
Color: Silver, Black
Form factor: Mini ITX
Total fans possible:
2x 140 / 120 mm (lid, max. 32 mm height)
Of which pre-installed: none
Radiator mounts:
1x max. 315 x 150 x 60 mm (L x W x H, with fan, lid)
Filters: none
Drive bays:
1x 2.5 inch (internal)
Power supply: 1x SFX or SFX-L (optional)
Expansion slots: 3
I/O panel:
USB 3.1 (Type C, USB 3.2 Gen 2, max. 10 Gbps)
USB 3.0 (Type A, USB 3.2 Gen 1, max. 5 Gbps)
1x lighting control (modes)
1x lighting control (colors)
1x power
Maximum dimensions of the graphics card: 324 x 62 x 147 mm (L x W x H), 3 slots
Maximum CPU cooler height: 72mm