PHANTEKS Enthoo Evolv ATX Midi-Tower, Tempered Glass - black [PH-ES515ETG_BK]

In addition to the already existing PWM fan hub and the dust filter for front and power supply cover, has the case (up to 360 mm) can be exchanged through three pre-installed 140 mm fans that complemented with other fans or radiators. In all other motherboards allow to E-ATX form factor and block up to five 3.5-inch and four 2.5-inch disks, two 2.5-inch instead of two 3.5-inch drives installed would be.

The key features of Phanteks Enthoo Evolv ATX midi tower in Tempered Glass-Edition:

    Exclusive design by tinted tempered glass side panels and high-tech materials
    Fits motherboards up to E-ATX form factor
    Included PWM fan hub, two dust filter & three 140 mm fans
    Hidden I / O panel with two USB 3.0 and HD audio connectors
    Accommodate five 3.5-inch & four 2.5-inch disk (2x 2.5-inch instead of 3.5-inch)
    Graphics cards up to 42 cm, CPU cooler to 19.4 cm & PSUs to 31.8 cm

Classy design with large side windows
The body inside is made of black painted steel, the removable front panel and the lid are made of 3 mm thick solid aluminum, which is anodised black here. Left and right side wall made of large tinted tempered glass pane, which is held by four screws and allows an impressive insight into the case and on the installed hardware respectively.

Down in the front sits a narrow strip of light, which illuminates when switched on - the color can be varied by different LEDs supplied. Air intakes for cooling have been discretely integrated into the gaps between the aluminum panels so as not to disturb the minimalist look. The same applies to the I / O panel that is located under a flap on the front and two USB 3.0 and HD audio connectors features.
Cooling options and hard disk bays
Behind the front panel to wait two factory installed 140 mm fan on its use and on the rear is an additional 140s mounted. Front and power supply slot in the base are equipped with removable dust filters. The fan assembly can hereby be increased in the lid and behind the front panel up to two 140- or even three 120-mm fans. Alternatively, also according to each a 280- or 360-mm heat exchangers are mounted, which can be installed in the cover on a side pull-out bracket. At the back of the installation of a radiator the size is similar to the fan assembly also 120 or 140 mm possible - overall a very strong ventilation and plenty of space for water cooling components.

The power supply, which is mounted in the housing bottom and is decoupled from the aeration of the hardware, sitting under a black metal cover, which makes the interior look very tidy and behind the front in this area also two bays for 2,5 or 3, 5-inch disk provides. At this point, however, the included anti-vibration pump bracket can be mounted alternatively. If this is installed in conjunction with a larger reservoir or behind the front a radiator is used, can be removed from the horizontal separation of a portion of its part but also provides for mounting a pump and reservoir.

There are so many different ways, drives and accommodate water cooling. Also directly behind the front there is the possibility to accommodate more 3,5- or 2,5-inch drives using the three supplied trays - the trays are screwed here with the motherboard support. Other two drives can be fitted with optional trays.
What is on the Mainboardtray back?
On the back of Mainboardtrays where stately 35 mm space to invite to ordinary cable laying, a PWM fan hub has been installed, the the automatically controlled operation of up to eight 3-pin fans over a single 4-pin PWM connector the motherboard allows. here Furthermore, two 2.5-inch bracket with "Drop-n-Lock" mechanism for two small 2.5-inch Drive available, another of this type can be front mounted on the side of the power supply cover.

Technical details:

    Dimensions: 235 x 495 x 510 mm (W x H x D)
    Weight: 10.2 kg
    Material: steel (chassis), aluminum (3mm; front cover), Tempered Glass (pages)
    Color: Black
    Form Factor: E-ATX (up to 264 mm wide), ATX, Micro-ATX, Mini-ITX
    Fan total possible:
    2x 140 / 3x 120 mm (front)
    140 2x / 3x 120 mm mm (lid)
    1x 140/120 mm (rear)
    Of preinstalled:
    2x 140 mm (front side; PH-F140SP, 1200 U / min, 19 dB (A))
    1x 140mm (rear; PH F140SP, 1200 r / min, 19 dB (A))
    Radiator Mountings (partial waiving HDD and / or fan slots):
    1x max. 280/360 mm (front)
    1x max. 140/120 mm (rear)
    1x max. 280/360 mm (lid) *
    * Distance from the motherboard tray in 120 format: 68 mm
    * Distance from the motherboard tray in a 140 format: 48 mm
    Please note possible maximum amount of memory!
    Filter: Front, Power Supply (removable)
    Drive Bays:
    5x 3.5 inch (internal; decoupled; + 3x optional via the optionally available HDD Bracket PH HDDKT_02)
    4x 2.5 inch (internal; 2x instead of 3.5 inches; 2x per SSD bracket behind the motherboard tray with "Drop-n-Lock" + 1x or 2x optional via the optionally available SSD Bracket GEPH-009 or GEPH -010)
    PSU 1x standard ATX (optional)
    Expansion Slots: 7
    I / O panel:
    2x USB 3.0
    2x Audio
    Maximum video card length: 420/300 mm (with / without HDD brackets)
    Maximum CPU cooler height: 194 mm
    Maximum power supply Length: 318 mm
    Warranty: 5 years