NZXT HUE 2 RGB LED Controller - black [AC-HUEP2-M1]

Via four channels, corresponding fans and RGB strips can be connected and controlled by the NZXT CAM software. The controller is compatible with NZXT's complete HUE 2 range, like the four included RGB LED strips, which can be mounted in the housing with the help of integrated magnets.

The features of the NZXT HUE 2 RGB LED Controller at a glance:
- 4-channel RGB controller for digitally addressable LEDs
- Control via the NZXT CAM software
- Compatible with HUE 2 products
- Including 4x 30 cm RGB LED strips with 10 addressable LEDs each
- Easy installation with magnets or via SSD slot

The features of the NZXT HUE 2 RGB LED Controller in detail:
The NZXT HUE 2 RGB LED Controller has four channels to which addressable RGB LEDs can be connected. Each of the four channels of the NZXT HUE 2 RGB LED Controller can manage RGB strips with up to 40 individually controllable LEDs. For example, all four RGB strips supplied with 10 LEDs each could be daisy-chained to one output. Alternatively, each channel of the controller can manage up to six HUE 2 RGB products or up to five NZXT Aer RGB fans.

The four supplied LED strips can be fixed in the housing by means of adhesive strips or by means of the four magnets integrated into the strips. Each strip is 30 cm long, 1 cm wide and equipped with ten LEDs. At the ends there is a male or a female connector. The RGB connections are color-coded so that the plugs are connected correctly. The strips can either be daisy-chained to a port / channel or individually to the NZXT HUE 2 RGB LED controller. For this the supplied connection cables are used.

The NZXT HUE 2 RGB LED Controller can be installed either in a 2.5-inch drive slot or with the magnets on the controller housing in the PC case. Power is supplied via Molex cable via the power supply. To connect to the motherboard, it must have a free USB 2.0 header. As soon as the controller is connected, the RGBs are controlled via the NZXT CAM software.

Important Note: The NZXT HUE 2 RGB LED Controller is compatible with first generation HUE + LED strips and Aer fans, but it is not possible to mix both generations on the same channel.

Technical Details HUE 2 RGB Controller:
- Dimensions: 100 x 76 x 15 mm (W x H x D)
- Form factor: 2.5 inches

Connections:
- Input: USB 2.0 (Micro-USB, via header on mainboard)
- Output: 4x 4-pin RGB header (5V DC)
- Power supply: 12 V (by molex from the power supply)

Technical details RGB strips:
- Dimensions: 300 x 10 mm (L x W)
- Number of LEDs: 10 pieces
- Connectors: 5V 4-pin male / female header

Delivery:
- 1x NZXT HUE 2 RGB LED Controller
- 4x 30 cm LED strip
- 4x 50 cm connecting cable
- 1x 50 cm extension cable
- 1x 30 cm extension cable
- 1x 60 cm USB connection cable
- 1x 30 cm power cable (Molex)
- 4x screw