The features of the NZXT H700i
Minimalist black case from NZXT
Integrated controller for fans and RGB LEDs
Side window made of tempered glass
Space for 280 mm or 360 mm radiators
Slots for seven 2.5-inch drivesNZXT H700i Midi-Tower: Fit for modding, now including Barrows RGB Distribution Panel
The front of this case is completely flat with no I / O panel. The latter is namely on the cover of this housing dream. The panel has two USB 3.0 and 2.0 ports and two audio sockets, as well as the inconspicuous power button.
As a special feature, the NZXT H700i Midi-Tower has an integrated controller called Smart Device with CAM support. It is used to control the Aer F fans already installed as well as the two RGB LEDs, which are immediately visible through the toughened glass window. Other fans or even more LED strips can of course also be connected. An acoustic sensor helps determine the optimal balance between cooling and noise. The control takes place via function-rich software on the PC.
Note: When installing Barrow Waterway plates, insert all screws first 50% of the way, until all are installed and then tighten them up fully at the end.
Note: All Cases, Pumps, Reservoirs, Controllers in product photos are for reference only.
- This Waterway board is only compatible with the NZXT H700 Case installed next to the Motherboard Tray, and may not fit other cases
- Can be used as a Reservoir with the Pump Inlet feed or stand alone (No Pump supplied)
- LRC 2.0 RGB 5v Lighting, compatible with Aura Sync, MSI Mystic, Gigabyte RGB, Asrock LED and Barrow LRC Controllers
- High production quality and strict QC ensure 100% no cracks or leaks
- G1/4 ports for ultimate flexibility
Space for data carriers and water coolers
In the black interior is a lot of space. In addition to EATX, ATX, Micro ATX and Mini-ITX motherboards, seven expansion cards can also be installed in the housing. You can also install up to seven 2.5-inch drives in the drive cage. There are also three 3.5-inch bays on the bottom and on the side of the power supply cage.
Enough space in the NZXT H700i Midi Tower is also available for AiO water cooling and even a custom loop. 280 mm or 360 mm radiators can be attached to the front or the top. Alternatively, there is room for either three additional 120mm or two 140mm fans in addition to the four 120mm fans on the front and back of the top. Who puts on a CPU cooler, has up to 185 mm in height. The graphics card may be up to 413 mm long.
Case Technical details:
Dimensions without feet: 230 x 494 x 494 mm (W x H x D)
Dimensions with feet: 230 x 516 x 494 mm (W x H x D)
Material: steel, tempered glass
Weight: 12.27 kg
Form factor: EATX, ATX, Micro-ATX, Mini-ITX
Total fan possible:
3x 120 mm or 2x 140 mm (front)
1x 120 mm or 1x 140 mm (back)
3x 120 or 2x 140 mm (cover)
3x 120 mm (front side)
1x 120 mm (back)
Filter: front, bottom
2x 140 or 3x 120 mm (front)
2x 140 or 3x 120 mm (top side)
3x 3.5 inches (internal)
7x 2.5 inches (internal)
Power supply: 1x standard ATX (optional)
Expansion Slots: 7
I / O panel:
2x USB 3.0 (internal connection)
2x USB 2.0 (internal connection)
1x each HD Audio In / Out
Maximum CPU cooler height: 185 mm
Maximum length of the graphics card: 413 mm
Manufacturer's warranty: 2 years
1x NZXT H700i Black Mid Tower Case
1x Barrow Waterway LRC 2.0 RGB Distribution Panel (Tray) For NZXT H700
Note: Distribution panel is supplied without pump, you can either use the panel as a reservoir and pipe an external pump to it as normal or you can install a Barrow Waterway panel pump directly to the board (Similar to DDC) for a neater look.
Integrated pump options:
- BarrowCH 17W PWM 960LPH Intelligent Pump For Waterway Panel With OLED Display - Black
- Barrow 17W PWM 960 LPH Pump for Waterway Panel - Clear (Coming soon)