Montech XR Midi Tower, tempered glass - black [XR (B)]

- Stylish midi tower for motherboards up to ATX
- Mesh on the lid, rear side panel and power supply chamber for optimized airflow
- Space for a maximum of nine fans or up to 360mm radiators
- Including three 120mm PWM ARGB fans
- Removable dust filters protect your hardware
- Space for graphics cards up to 420mm long
- Up to four drives (behind the motherboard tray and hard drive cage)

The Montech XR midi tower in detail
The XR from Montech is a midi tower with a very elegant front I/O together with a design that resembles wood grain. It is also optimized for airflow and comes with a total of three integrated, powerful ARGB PWM fans ex works. The manufacturer is thus setting the basis for every gaming computer that focuses on cooling performance. The case consists of a sturdy steel construction, the side panel and front of which are made of tempered glass. The lid, the side of the power supply chamber and the rear side panel are provided with a fine mesh. The high air permeability benefits the cooling of your components.

Montech XR: Elegant, compact and robust
Both advocates of air cooling and water cooling enthusiasts will get their money's worth with this case: The Montech XR offers options for installing a total of nine fans. Instead of on the front, two powerful 120 mm fans are pre-installed on the side. Three 120 mm fans can be installed on the lower power supply cover. A 120 mm fan is also pre-installed on the back. All three of the Montech fans can be controlled via PWM signal and have ARGB lighting. Three 120 mm or two 140 mm fans can be retrofitted in the lid. The height of the CPU cooler is limited to a maximum of 175 mm.

Lots of space for radiators
Montech has also made provisions for fans of AiOs or custom water cooling systems. Radiators of up to 240 mm can be mounted on the side. There is space for a radiator of up to 360 mm on the lid. Thanks to the generous mesh surfaces, a lot of air gets in and out of the case. To ensure the long-term effectiveness of your cooling and to make cleaning your fans easier, additional dust filters are attached to the side and in the base. You can easily remove, clean and reinsert them.

Space for drives and a well-equipped I/O panel
The interior offers an exceptional amount of space for powerful hardware, for example for ATX motherboards and high-performance gaming graphics cards up to 420 mm long. The graphics card can also be installed vertically using the optional PCI bracket from Montech. Two 2.5-inch SSDs can be attached to the back of the motherboard tray in the corresponding brackets.

Under the power supply cover of the Montech XR there is a drive cage for two 3.5-inch hard drives. Behind it there is space for an ATX power supply with a length of up to 230 mm. The I/O panel of the SKY TWO offers two USB 3.0 Type A ports, a USB-C port, a 3.5 mm jack socket for headphones and microphone, and a reset button.

Technical details
Technical details:
- Dimensions: 230 x 450 x 435 mm (W x H x D)
- Material: Steel (chassis), tempered glass (front, left side panel), mesh (inserts)
- Color: Black
- Form factor: ATX, Micro-ATX, Mini-ITX
- Total fans possible:
- Side: 2x 120 mm
- Cover: 3x 120 / 2x 140 mm
- Rear: 1x 120 mm
- Power supply cover: 3x 120 mm
- Of which pre-installed:
- Side: 2x 120 mm, ARGB, PWM
- Rear: 1x 120 mm, ARGB, PWM
- RPM: 700 - 1500 rpm
- Radiator mountings:
- Side: 1x max. 240 mm
- Cover: 1x max. 120 / 140 / 240 / 360 mm
- Rear: 1x 120 mm
- Filter: side, bottom (removable)
- Drive bays:
- 2x 2.5 inch (MB tray)
- 2x 3.5 (drive cage)
- Power supply: 1x standard ATX (optional)
- Expansion slots: 7
- I/O panel:
- 2x USB 3.0 (Type A, USB 3.2 Gen 1, max. 5 Gbit/s)
- 1x USB-C
- 2x 3.5 mm jack (3-pin, 1x audio in / 1x audio out) 1x reset button
- Maximum graphics card length: 420 mm
- Maximum CPU cooler height: 175 mm
- Maximum power supply length: 230 mm