NOTE - Product is short dated or past best by date - but stored in a cool environment with no direct sunlight, will still be fine to use. Discounted to clear stock.
CFX has a shelf life of over 3 years and contains synergistic corrosion inhibitors to protect metals such as Copper, Nickel, Brass, Steel and Aluminium tested to BS5117, BS6580 and ASTM D1384 standards. CFX is 90% Biodegradable over 10 days.
CFX has a shelf life of over 3 years and contains synergistic corrosion inhibitors to protect metals such as Copper, Nickel, Brass, Steel and Aluminium tested to BS5117, BS6580 and ASTM D1384 standards. CFX is 90% Biodegradable over 10 days.
Features:
• Concentrated Liquid ready to Mix with 850ml Distilled to form 1Ltr of CFX Opaque coolant.
• Synergistic corrosion inhibitors to protect metals such as Copper, Nickel, Brass, Steel and Aluminium tested to BS5117, BS6580 and ASTM D1384 standards. Also contains anti-growth and scale inhibitors.
• Long lasting, none stain water dyes to produce awesome colours to contrast with other accent parts in your rig.
• High Efficiency, Non Toxic Ethanediol mix for increased cooling performance, with a non-pungent aroma.
• Electrical Conductivity less than 10µS/cm (20°C)
• 3 Years Shelf Life, when stored in its original sealed container (induction seal not broken) out of direct sunlight.
• Designed to not separate or clog your system with particles thanks to our CFX 100% miscible opaque liquid base.
Classification - Regulation (EC) No. 1272/2008 (CLP)
• Physical and chemical hazards: Not classified as a physical or chemical hazard
• Human health: Not classified as a health hazard
• Environment: Not classified as an environmental hazard
Product contains less than 0.1% Benzisothiazolinonea, and features a Child Safety Cap, and Induction Sealed contents.
Note: Liquid cool CFX is safe to use on PETG Hard tubing for 12 months, at which time we recommend flushing the system with distilled and adding new CFX when ready.
Note: The 150ml Concentrate as bottled is slightly darker (as it's more concentrated) than what the liquid becomes when mixed to ratio as above.
Mixing Instructions:
1, Fill a clean Jug or Container with 850ml of Distilled, Pure or Deionised water.
2, Open your CFX concentrate bottle cap, remove the bottle seal and pour into the 850ml.
3, Give the liquid a stir for a few seconds until its mixed.
4, Your High Performance Liquid Coolant is now ready for use in your PC.
Note: Any coolant that is left over can be stored in a sealed container and used for top ups for the duration of time you use this liquid. Do not mix with any other Additive or Biocide or liquid coolant.