The wide two-chamber design of the ATX chassis provides plenty of room for highly-developed gaming components and allows for the installation of an extensive air or custom water cooling system. The option of a vertically installed graphics card, which can be particularly well represented by optional accessories, is particularly interesting.
The features of the Lian Li PC-O11WX Midi-Towers:
Noble combination of aluminum and tempered glass
Space for mainboards with E-ATX, ATX or Micro ATX form factor
Clever two-chamber design
4x 3.5 "HDDs & 4x 2.5" SSDs
Front panel with 2x USB 3.0 Type-A & 1x USB 3.1 Type-C
Graphics cards up to 43 cm in length
Accommodates up to three 360 mm radiators
Up to four 120s and two 80s fans
Graphic card vertically adjustable (optional)
ATX housing with noble design: brushed aluminum meets tempered glass
With the Lian Li PC-O11WX brushed aluminum is skillfully combined with a side part of tinted tempered glass (hard glass). Lian Li goes a step further and equips the left chamber of the ATX case with a front of hard glass. The right-hand side of the front is brushed aluminum and houses the front panel with a USB 3.1-type C port, two USB 3.0 ports, and the two mandatory audio ports.
The Lian Li PC-O11WX can accommodate up to an E-ATX mainboard, a graphics card up to 430 mm long and a CPU cooler up to 150 mm in the left chamber. For the installation of an AiO or custom water cooling, the Case offers the possibility to install up to three 360 mm radiators. One in the lid, one on the floor and one on the front bracket, which the user can also omit.
These radiator positions can, of course, also only be occupied by fans and in each case take up three 120 mm fans. In addition, the back of the case can accommodate two 80mm fans. The right chamber accommodates the hardware, which hardly radiates heat and does not have to be cooled particularly. In addition to the ATX power supply and plenty of space for cable management, you can store data here.
Two modular HDD racks are used to mount said data memories. Two 3.5-inch HDDs and two 2.5-inch SSDs can be installed on each of these racks, each of which is supplemented by two other sizes at different positions in the enclosure. In total, four 3.5 "and 2.5" data carriers can be mounted.
The Lian Li PC-O11WX stands slightly elevated on a small pedestal so that cool air can penetrate through the dust-covered floor into the housing. Due to the chimney principle, the warm air rises upwards, where it escapes through the cover, which is also provided with a dust filter.
The elegant case is definitely a real eye-catcher and can accommodate gaming hardware without hassle. A special highlight is the possibility of vertically installing up to two graphics cards, which makes them particularly well-presented. However, optional riser cables as well as an optional shield for the PCIe slots are required.
Dimensions: 277 x 506 x 457 mm (W x H x D)
Material: brushed aluminum (chassis), steel (interior), tempered glass (front, side)
Weight: approx. 10.6 kg
Form Factor: E-ATX, ATX, Micro-ATX
Total fan possible:
3x 120 mm (bottom)
3x 120 mm (cover)
3x 120 mm (front, only with bracket installed) 2x 80 mm (rear)
Radiator mountings (dispensing with fan slots):
1x max. 360 mm (cover)
1x max. 360 mm (bottom)
1x max. 360 mm (front, only with bracket installed)
Filter: Bottom, cover
4x 3.5 Inch Drives (Internal)
4x 2.5 Inch Drives (Internal)
Power supply: 1x ATX (optional)
Expansion slots: 8
I / O panel:
1x USB 3.1 Type-C (internal connection)
2x USB 3.0 Type-A (internal connection)
1x each audio in / out
On / off switch
Maximum graphics card length: 430 mm
Maximum CPU cooler height: 150 mm
Maximum net length: 430 mm