What's left is the ATX's wide two-chamber design, which offers plenty of room for sophisticated gaming components, along with excellent cable management, and allows for the installation of extensive air or custom water cooling.
Features of the Lian Li PC-O11 Dynamic Midi Tower:
Noble combination of aluminum, tempered glass and steel
Space for motherboards with E-ATX, ATX or Micro ATX form factor
Clever two-chamber design
4x 2.5 "SSDs & 2x 3.5" HDDs
Front panel with 2x USB 3.0 Type-A & 1x USB 3.1 Type-C
Graphics cards up to 42 cm in length
Accommodates up to three 360mm radiators or two 280mm radiators
Up to nine 120mm fans possible
Space for two power supplies
ATX case with elegant design: brushed aluminum meets tempered glass
The Lian Li PC-O11 Dynamic Midi Tower skilfully combines 8 mm steel with a tinted tempered glass side panel. But Lian Li goes one step further and equips the left chamber of the ATX case with a tempered glass front. The right part of the front is made of brushed aluminum and houses the front panel with a USB 3.1 Type C port, two USB 3.0 ports and the two mandatory audio ports.
The Lian Li PC-O11 Dynamic Midi Tower can hold a maximum of one E-ATX motherboard, one up to 420mm long graphics card, and up to 155mm high CPU cooler in the left chamber. For the installation of AiO or custom water cooling, the case offers the possibility of accommodating up to three 360 mm radiators simultaneously: one in the lid, one on the bottom and one next to the mainboard. For this, the motherboard tray has been moved to the right in the front area compared to its predecessor. In the right side panel are also ventilation slots to dissipate the heat accordingly. Alternatively, a 280 mm radiator can be accommodated at the top and bottom.
Of course, the radiator slots can also be equipped with fans. There may be up to three 120s on the side behind the front, and on the top and bottom there are two 140s instead of three 120s. For a clean cable management several partially rubberized cable glands are present, which are placed, inter alia, on the slope next to the motherboard. The right-hand chamber houses the hardware, which hardly radiates heat and does not need to be cooled particularly.
The Lian Li PC-O11 Dynamic Midi Tower stands slightly elevated on rubberized steel feet to allow cool air to enter the case through the dust-filtered bottom. The chimney effect causes the warm air to rise, where it escapes through the lid, which is also provided with a dust filter. Two further dust filters cover the two perforated grids in the right side panel. The elegant Lian Li PC-O11 Dynamic Midi Tower is not only a definite eye-catcher and can easily accommodate gaming hardware, but is also ideal for PC enthusiasts who want to cool their hardware with a custom loop.
Space for a second power supply
For mounting the data storage, there is an HDD cage, in which two 3.5-inch HDDs can be accommodated. The two slots are accessible from the back of the case, they are covered by a perforated panel. Two 2.5-inch SSDs can be mounted on the back of the motherboard tray. In addition, there are two more 2.5 "brackets bolted to the bottom of the right side panel. A total of two 3.5-inch and four 2.5-inch disks can be mounted. Of course, the HDD cage can also be removed to make room for a second power supply that, like the first, is installed vertically.
Note: If you want to install your graphics card or even vertical cards in the Lian Li PC-O11 Dynamic Midi Tower, you can purchase the optional Lian Li O11D-1 Expansion Kit (GELI-809). Only this kit is compatible with the Lian Li PC-O11 Dynamic Midi Tower! It includes a correspondingly adapted slot panel and a high-quality riser cable.
Dimensions: 272 x 446 x 445 mm (W x H x D)
Material: steel (interior), aluminum (front), tempered glass (front, side)
Weight: about 10.1 kg
Form factor: E-ATX, ATX, Micro-ATX
Total possible fan:
3x 120 mm / 2x 140 mm (bottom)
3x 120 mm / 2x 140 mm (cover)
3x 120 mm (side panel, front)
Radiator mountings (waiving fan slots):
1x max. 360 mm / 240 mm (cover)
1x max. 360 mm / 240 mm (floor, waiving SDD brackets)
1x max. 360 mm (side panel, front)
Filter: bottom, lid, side panel
2x 3.5-inch drives (internal)
4x 2.5-inch drives (internal)
Power supply: 2x ATX (optional)
Expansion Slots: 8
I / O panel:
1x USB 3.1 Type-C (internal connection)
2x USB 3.0 Type-A (internal connection)
1x each audio in / out
On / off switch
Maximum graphics card length: 420 mm
Maximum CPU cooler height: 155 mm
Maximum network part length: 255 mm