The Lian Li O11 Dynamic XL (ROG Certified) Midi-Tower combines brushed aluminum with tempered glass elements. The dimensions of the case have been adjusted so that even the huge SSI EEB motherboard ASUS ROG Dominus Extreme with Intel's C621 chipset and the socket 3647 for Xeon processors can easily fit into the case with the help of an optional extension rail. What remains is the wide two-chamber design of the Midi Tower, which offers plenty of room for more sophisticated gaming components, along with excellent cable management, and allows for the installation of extensive air or custom water cooling.
Features of the Lian Li O11 Dynamic XL (ROG Certified) Midi-Towers:
- Noble combination of aluminum, tempered glass and steel
- Space for motherboards with E-ATX, ATX, Micro-ATX or Mini-ITX form factor
- 6x 2.5 "SSDs & 4x 3.5" HDDs including HDD hot swap feature
- Front panel with 4x USB 3.0 Type-A & 1x USB 3.1 Type-C
- Graphics cards up to 44.6 cm in length
- Three built-in slots for 360 mm radiators
- Up to ten 120 mm fans possible
E-ATX case with classy design: brushed aluminum meets tempered glass
The modular Lian Li O11Dynamic XL (ROG Certified) Midi Tower skilfully combines steel with a tinted tempered glass side panel. Lian Li goes one step further and equips the right side panel and lid with 1 mm thick aluminum. The front side is also made of tempered glass and, together with the side part, allows an almost unobstructed view of the interior of the case.
The right part of the front houses the I / O panel with a USB 3.1 Type C port, two USB 3.0 ports and the two mandatory audio ports. Two more USB 3.0 ports are located on the right foot of the front panel. Between the I / O panel and tempered glass is a subtle RGB LED strip, which extends from top to bottom and whose lighting can be controlled via two switches on the panel. Optionally, the RGB LED strip can also be connected to a conventional 5VDG slot of a correspondingly equipped mainboard.
Ample space for gaming hardware
The Lian Li O11 Dynamic XL (ROG Certified) Midi Tower offers plenty of room for powerful gaming hardware. Even the huge SSI EEB motherboard ROG Dominus Extreme from Asus can be installed with the help of an optional expansion rail from Lian Li. Graphics cards may be up to 446 millimeters long, CPU coolers may have a height of 167 millimeters. An ATX power supply is installed in the back left lower corner and may be 210 millimeters long.
For the installation of AiO or custom water cooling, the case offers the possibility to accommodate up to three 360 mm radiators simultaneously: one in the lid, one on the bottom and one next to the mainboard. In the right side panel are also ventilation slots to dissipate the heat accordingly. If you want to install three 360 mm radiators simultaneously, you should use narrow specimens in the lid and a slim radiator next to the mainboard. In general, the installation of three triple radiators is possible, but this requires a bit of attention when choosing components for custom water cooling. The lid also offers the option of installing a 280 mm radiator.
Excellent airflow for fantastic cooling
Of course, the radiator slots can also be equipped with fans. There may be up to three 120s on the side behind the front, on the lid and on the floor. Instead of three 120s, there are two 140s on the lid and bottom. For a clean cable management several partially rubberized cable glands are present, which are placed, inter alia, on the middle plate next to the motherboard. The right chamber houses the hardware, which emits little heat and does not need to be cooled, such as the power supply and HDD drives.
The Lian Li O11 Dynamic XL (ROG Certified) Midi Tower stands slightly elevated on rubberized steel feet to allow cool air to enter the case through the dust-filled bottom. The chimney effect causes the warm air to rise, where it escapes through the lid, which is also provided with a dust filter. Two further dust filters cover the two perforated grids in the right side section. The stylish Lian Li O11 Dynamics XL (ROG Certified) midi tower is definitely a real eye-catcher and can easily accommodate gaming hardware, but is also great for PC enthusiasts who want to cool their hardware with a custom loop.
Drives full: Up to 10 data carriers can be mounted on the housing!
There are two HDD cages for mounting the data storage devices, which can accommodate four 3.5-inch HDDs or four 2.5-inch HDDs / SSDs. The four slots are accessible from the back of the case, they are covered by a perforated panel. Three 2.5-inch drives can also be mounted on the back of the motherboard tray. In addition, there are three more 2.5-inch slots on a bracket in front of the motherboard tray. The bracket can instead be attached to the floor, for example, to create space next to the motherboard for a radiator or the optional extension rail. A total of four 3.5-inch and six 2.5-inch disks can be mounted.
Note: If you want to install your graphics card or even cards vertically in the Lian Li PC-O11Dynamic XL Midi Tower, you can purchase the optional expansion kit Lian Li O11DXL-1 (GELI-821). Only this kit is compatible with the Lian Li O11 Dynamic XL (ROG Certified) Midi Tower! It includes a correspondingly adapted slot panel and a high-quality riser cable. For the vertical installation of a second graphics card, a second riser cable is required, which is also available from Lian Li (GELI-822).
- Dimensions: 285 x 513 x 471 mm (W x H x D)
- Material: steel (interior), aluminum (cover, side panel, front, feet), tempered glass (front, side panel)
- Weight: about 10.1 kg
- Color: white, black (HDD cages, Gromits, tempered glass frame, dust filter)
- Form factor: E-ATX, ATX, Micro-ATX, Mini-ITX (EEB with optional extension rail)
Total possible fan:
- 3x 120 mm / 2x 140 mm (bottom)
- 3x 120 mm / 2x 140 mm (cover)
- 3x 120 mm (side panel, front)
- 1x 120 mm (back)
Radiator mountings (waiving fan slots):
- 1x max. 360 mm / 280 mm (cover)
- 1x max. 360 mm / 280 mm (floor)
- 1x max. 360 mm (side part, waiving SDD brackets)
- Filter: bottom, lid, side panel
-4x 2.5 / 3.5-inch drives (internal)
- 6x 2.5-inch drives (internal)
- Power supply: 1x ATX (optional)
- Expansion Slots: 8
I / O panel:
- 1x USB 3.1 Type-C (internal connection)
- 4x USB 3.0 Type-A (internal connection)
- 1x each audio in / out
- On / off switch
- Maximum graphics card length: 446 mm
- Maximum CPU cooler height: 167 mm
- Maximum network part length: 210 mm