The dimensions of the case have been adjusted so that even the huge SSI EEB mainboard ASUS ROG Dominus Extreme with Intel's C621 chipset and socket 3647 for Xeon processors can be comfortably accommodated in the case with the help of an optional expansion rail. What has remained is the wide two-chamber design of the Midi-Tower, which offers plenty of space for further sophisticated gaming components with excellent cable management and enables the installation of extensive air or custom water cooling.
The features of the Lian Li O11Dynamic XL (ROG Certified) Midi-Tower:
- Noble combination of aluminum, tempered glass and steel
- Space for motherboards with E-ATX, ATX, Micro-ATX or Mini-ITX form factor
- 6x 2.5 "SSDs & 4x 3.5" HDDs including HDD hot swap function
- Front panel with 4x USB 3.0 Type-A & 1x USB 3.1 Type-C
- Graphics cards up to 44.6 cm in length
- Three installation slots for 360 mm radiators
- Up to ten 120 mm fans possible
- E-ATX case with elegant design: Brushed aluminum meets tempered glass
The modular Lian Li O11Dynamic XL (ROG Certified) Midi-Tower offers a stable steel construction and aluminum outer panels. The left side part and the front cover are made of tempered glass and allow a look inside the housing and the hardware components built into it.
The right part of the front houses the I / O panel with a USB 3.1 Type-C port, two USB 3.0 ports and the two mandatory audio connections. Two further USB 3.0 ports are located on the right foot end of the front. Between the I / O panel and tempered glass pane there is a subtle RGB LED strip that extends from top to bottom and whose lighting can be controlled via two switches on the panel. The RGB LED strip can also be connected to a conventional 5VDG slot on an appropriately equipped mainboard.
Plenty of room for gaming hardware
The Lian Li O11Dynamic XL (ROG Certified) midi tower offers plenty of space for powerful gaming hardware. Even the huge SSI EEB mainboard ROG Dominus Extreme from Asus can be installed with the help of an optional expansion rail from Lian Li. Graphics cards can be up to 446 millimeters long, CPU coolers can have a height of 167 millimeters. An ATX power supply is installed upright at the bottom left and can be 210 millimeters long.
For the installation of AiO or custom water cooling, the case offers the option of accommodating up to three 360 mm radiators at the same time: one in the lid, one on the bottom and one next to the mainboard. In the right side part there are also ventilation slots to dissipate the heat accordingly. If you want to install three 360 mm radiators at the same time, you should use narrow specimens in the lid and a slim radiator next to the mainboard. In general, the installation of three triple radiators is possible, but this requires some attention when choosing the components for the custom water cooling. In the lid there is also the option of installing a 280 mm radiator.
Excellent airflow for fantastic cooling
The radiator slots can of course also be filled with fans. On the side behind the front, on the lid and on the bottom there can be up to three 120s, on the lid and on the bottom there are two 140s instead of three 120s. For a clean cable management, there are several partially rubberized cable bushings, which are placed on the middle plate next to the mainboard. The right chamber houses the hardware that hardly radiates heat and does not need to be cooled, such as the power supply and the HDD drives.
The Lian Li O11Dynamic XL (ROG Certified) Midi-Tower stands slightly elevated on rubberized steel feet, so that cool air gets into the case through the bottom with a dust filter. Due to the chimney effect, the warm air rises, where it escapes through the lid, which is also equipped with a dust filter. Two additional dust filters cover the two perforated grilles in the right side section. The elegant Lian Li O11Dynamic XL (ROG Certified) Midi-Tower is not only a real eye-catcher and can easily accommodate gaming hardware, but is also particularly suitable for PC enthusiasts who want to cool their hardware using a custom loop.
Drives full: Up to 10 data carriers can be mounted on the housing!
There are two HDD cages for mounting the data storage, in which four 3.5-inch HDDs or four 2.5-inch HDDs / SSDs can be accommodated. The four slots can be reached from the back of the housing, they are covered by a perforated cover. Three 2.5-inch drives can also be mounted on the back of the mainboard tray. In addition, there are three additional 2.5-inch slots on a bracket at the front next to the mainboard tray. Instead, the bracket can also be attached to the floor, for example to create space for a radiator or the optional expansion rail next to the mainboard. A total of four 3.5-inch and six 2.5-inch data carriers can be installed.
Note: If you want to vertically install your graphics card or even cards in the Lian Li PC-O11Dynamic XL Midi-Tower, you can purchase the optional expansion kit Lian Li O11D-1 (GELI-821).
Caution! Only this kit is compatible with the Lian Li O11 Dynamic XL (ROG Certified) Midi-Tower! It includes an appropriately adapted slot cover and a high-quality riser cable. For the vertical installation of a second graphics card, a second riser cable is required, which is also available from Lian Li (GELI-822).
Dimensions: 285 x 513 x 471 mm (W x H x D)
Material: steel (interior), aluminum (lid, side part, front, feet), tempered glass (front, side part)
Weight: approx.10.1 kg
Color: silver, black (HDD cages, gromits, TG frame, dust filter)
Form factor: E-ATX, ATX, Micro-ATX, Mini-ITX (EEB with optional expansion rail)
Total fans possible:
3x 120 mm / 2x 140 mm (bottom)
3x 120 mm / 2x 140 mm (cover)
3x 120 mm (side part, front)
1x 120 mm (back)
Radiator mountings (no fan slots):
1x max. 360 mm / 280 mm (lid)
1x max. 360 mm / 280 mm (bottom)
1x max. 360 mm (side part, without SDD brackets)
Filters: bottom, lid, side part
4x 2.5 / 3.5-inch drives (internal)
6x 2.5-inch drives (internal)
Power supply: 1x ATX (optional)
Expansion slots: 8
I / O panel:
1x USB 3.1 Type-C (internal connection)
4x USB 3.0 Type-A (internal connection)
1x per audio in / out
On / off switch
Maximum graphics card length: 446 mm
Maximum CPU cooler height: 167 mm
Maximum power supply length: 210 mm