Lian Li LANCOOL ONE Midi Tower - black [LANCOOL ONE]

 The RGB LED lighting highlights the already chic housing again. Rounding out the LANCOOL cases with small but fine features, such as a power supply cover that can accommodate either fans or SSDs.
The features of the LANCOOL ONE at a glance
- Slim and spacious E-ATX case in black
- Front with ample ventilation slots and RGB LED lighting
- Nine fans in total possible, two 120-mm fans preinstalled
- 2x radiators up to 360 mm possible
- Graphics cards up to 420 mm, CPU cooler up to 175 mm

Optimally ventilated, perfectly water-cooled
From the outside, the LANCOOL ONE makes a slim impression, but inside there is ample space for air and water cooling. A total of nine fans can accommodate 120 mm fans, should it be 140, then a total of four can be installed. Two 120mm fans are added by Lian Li, one installed at the front and another at the back. A special feature are the two fan slots on the power supply cover, which is almost continuously provided with ventilation slots on the top. For a CPU cooler remains with a maximum of 175 mm ample space.

Who wants to put instead on a water cooling, also has plenty of opportunities. The front and lid are fitted with 360mm radiators. An additional 120 mm radiator can be attached to the back. This can cool any amount of powerful hardware. With a 65 millimeter deep radiator on the front graphics cards may be up to 350 millimeters long. If fans are installed at the front, pixel cars with a length of 420 millimeters have space. Graphics types can also be installed vertically. The required riser cable must be purchased separately. Motherboards with a form factor up to E-ATX can be accommodated in the spacious housing. Also for power supplies remains with a maximum of 285 millimeters enough space.

Stylish and functional design
In order to provide the inside of the case with enough cool air, Lian Li has not only provided the front with its stylish brushed aluminum with large side vents, but also provided the front with corresponding openings that significantly shape the design of the case. They not only look good with their bevels, but they also hide an RGB LED strip, which dips the LANCOOL ONE into any color. The I / O panel is also well-equipped, in addition to two USB 3.0 slots and two audio jacks, there is also a switch for controlling the RGB LED lighting.

Optionally, the RGB LED strip can be connected to the enclosed RGB LED controller and then controlled via said switch on the I / O panel. Alternatively, the strip can be connected to a 4-pin header of a motherboard and then controlled by the appropriate software. The required cables are enclosed with the housing.

Although the front is the real eye-catcher, the left-hand side part made of tempered glass grants an unobstructed view of the tidy interior of the case. The already mentioned power supply cover also directs the view of the essential hardware such as motherboard or graphics card. If there are no fans running, the top can be covered by two panels, which accommodate two of a total of four 2.5-inch SSDs. There are two more SSDs on the back of the motherboard tray and under the power supply cover on the front there is an HDD cage that can hold two 3.5 "drives. Three dust filters on the bottom, top and front complete the lush features.

Technical details:
- Dimensions: 220 mm x 472 mm x 450 mm
- Material: aluminum (front), steel (interior), tempered glass (side panel), plastic (front, cover)
- Weight: 8.25 kg
- Color: Black
- Form factor: E-ATX, ATX, Micro-ATX, Mini-ITX
Total possible fan:
- 2x 140 mm / 3x 120 mm (front)
- 2x 140 mm / 3x 120 mm (cover)
- 1x 120 mm (back)
- 2x 120 mm (top of power supply cover)
Preinstalled:
- 1x 120 mm (front side)
- 1x 120 mm (back)
Radiator mountings (without fan slots):
- Max. 1x 360 mm / 1x 280 mm (front)
- Max. 1x 360 mm (top)
- Max. 120 mm (back)
- Filter: front, bottom, lid
Drive Bays:
- 2x 3.5-inch drives (internal)
- 4x 2.5-inch drives (internal)
- Power supply: ATX (optional)
- Expansion Slots: 7 + 2 vertical
I / O panel:
- 2x USB 3.0 Type-A (internal connection)
- 1x RGB LED control
- 1x per AudioIn / Out
- Maximum graphics card length: 420 mm
- Maximum CPU cooler height: 175 mm
- Maximum network part length: 224 mm