Lian Li LAN2-3X hot swap backpanel for Lancool II [LAN2-3X]

In order to ensure that this precious collection is ready for use in the long term and sustainably, the Taiwanese manufacturer also offers a comprehensive range of spare parts and retrofits.

This board is an expansion option for the LANCOOL II by Lian Li, which is subsequently expanded by three hot swapp slots. To do this, screw the backplane to the back of the 3.5-inch hard drive cage, for which corresponding holes are already available.

The board is connected to the mainboard via three SATA data cables. The drives to be integrated are powered either via two SATA power plugs directly from the power supply. You can then slide the drives into the slots, where they come into contact with the SATA connectors on the backplane.

Notes: The Lian Li LAN2-3X hot-swap back panel is only compatible with the LANCOOL II midi tower case.
The backplane does not have an extra RAID controller or SATA chip, but requires corresponding mainboard connections for hot swapping. The main boards must support hot swapping and must be configured accordingly to ensure functionality and prevent damage.

Technical details:
Connections:
3x SATA data (data transfer)
2x SATA power (power supply)
Compatibility:
Lian Li LANCOOL II midi tower