The update of the series brings a new design, an improved ball bearing and digitally addressable RGB LED lighting. Thus, the BR120 digital fans with features such as a fluid dynamic ball bearing, easy disassembly and convincing performance data as well as the impressive RGB lighting effects including controller / remote control, fan hub and aluminum frame, combine plenty of features in a mature package. Of course, the fans get even better in this practical 3-pack.
Features of the Lian Li BR120 Digital RGB PWM Fan:
- Fluid dynamic ball bearing for smooth running and long service life
- On the fan frame made of aluminum mounted decoupler for vibration reduction
- RGB dispersion ring inside with 12 individually digitally addressable RGB LEDs
- Including PWM fan hub for a total of 6 fans
- Wired remote control for RGB LEDs, alternatively control via the motherboard possible
- 900 - 1800 rpm speed at 29 dB (A)
- 98.5 m³ / h max. Airflow & 1,46 mm max. H2O air pressure
- Complex dynamic RGB lighting effects & PWM control
Thanks to its modular design consisting of fan and hub with dispersion ring and two aluminum frame panels, the fan is particularly easy to clean and has a custom finish. This also allows the fluid-dynamic ball bearing change, but ensures a smooth running and life expectancy. Due to the reduced friction losses, higher speeds are achieved with the same energy consumption than with conventional fans. The effective speed is thus set at 1800 rpm. With up to a maximum of 29 dB (A) under full load, the BR120 digital fans are also very quiet and offer very good performance with 98.5 m³ / h Airflow and 1.46 mm H2O static pressure at full speed.
The RGB LEDs in this version have migrated into a dispersion ring around the hub. In the fan frame, rings made of lightweight aluminum are still introduced, which provide for increased stability, but also look particularly stylish. In conjunction with the included RGB controller hub, which also serves as a wired remote control, so countless lighting effects in all colors of the rainbow can be configured and controlled in their speed and intensity. Alternatively, the lighting can also be controlled via the mainboard. A separate PWM hub for up to six fans, which is connected to the motherboard, the fan speed is controlled as usual by software and BIOS.
Technical details:
- Dimensions: 120 x 120 x 27 mm (W x H x D)
- Material: aluminum, plastic, steel
- Color: gray / silver (frame), milk white-transparent (rotor), silver (frame)
- Connection: 4 pin PWM
- Cable length: approx. 50 cm
- Speed: 900 - 1800 rpm
- Volume: 19.4 - 29 dB (A)
- Delivery volume: max. 98.5 m³ / h
- Static pressure: max. 1.46 mm H2O
- Voltage: 10.8 to 13.2 V.
- Starting voltage: 6V
- Current: 0.45 A
- Power consumption: 5.4 W
Delivery:
- 3x fan
- 1x 4-pin PWM air hub for six fans including adhesive tape
- 1x 4-pin PWM fan cable for connection to the mainboard
- 1x RGB LED controller / remote control
1x SATA adapter
- -1x RGB LED splitter cable with three connections for RGB controller
- 1x RGB LED splitter cable with three connections for mainboard (5VDG)
- 1x RGB LED splitter cable fan and 3-pin RGB strip
- 3x adhesive strips for RGB LED controller / remote control 12x fan screws