Lamptron CR430 LED and fan control - black / UV [LAMP-CR430BUV]

The CM430 has four handy temperature sensors in this version, as well as a violet-lit LCD touch screen, which in addition to extensive information also provides easy configuration of the connected fans.

The most important features of the CM430 fan controller at a glance:

    High-quality housing made of aluminum
    LCD touch screen with violet lighting in limited edition
    Four channels each with 30 watts of power
    Connections for 3x 3-pin & 1x 4-pin fans
    Four temperature sensors already included
    Automatic or manual control

Design & installation of the CM430 fan controller

Lamptron's CM430 fan controller can be quickly and easily bolted into a 5.25-inch slot. The four included screws provide a secure hold and complement the computer with a practical solution for regulating built-in fans. The black frame captivates with its brushed aluminum look and perfectly surrounds the violet-glowing LCD touch display. The fan control with the LC display in this color is only available in a limited edition!

A total of three standard (3-pin) and one PWM (4-pin) fans can be connected, with the latter also being replaced by a standard fan. In addition to the 4-pin cable and the three 3-pin cables, the scope of supply also includes a total of four temperature sensors. Power is supplied to the fan control via a 4-pin Molex connector, which in turn is not included.

Functions of the CM430 fan controller

The display of the fan control offers a variety of information and configuration options. In addition to a power-on / off switch, there is the possibility to switch between the four available channels on the right side. The selected channel will also be displayed large again. The middle of the display shows the current speed of the fan in the form of a tachometer. To the left are the temperature and a changeable speed, volt or percent display.

The CM430 fan control also offers the possibility to make all settings manually or to select automatic operation. In addition, the brightness of the lighting can be adjusted in three stages (100%, 50% or 0%). After switching on the fan control, the lighting is set to 100% by default. In automatic mode, it turns off after three minutes.

The CM430 is also equipped with an alarm function that can warn the user if the temperature is too low or too high. This feature is quick and easy to configure and also easy to disable or enable. Likewise, you can switch between "Quiet" and "Fullpower" modes, depending on the cooling requirements.

Note: The three 3-pin connectors also accept 4-pin PWM fans instead of standard fans. However, these can only be regulated by the voltage.

Technical details:

    Dimensions (total): 148.5 x 42.5 x 63 mm (W x H x D)
    Dimensions (LCD): 129 x 32.5 mm (W x H)
    Compatibility: 1x 5.25 inch bay
    Color: Black (case), Violet (Lighting)
    Fan channels: 4 (max 30 W per channel)
    Voltage: 0 - 12 V DC
    Connections:
    1x 4-pole molex
    1x 4- or 3-pin fan
    3x 3-pin fan
    4x 2-pin temperature sensor
    Delivery:
    1x CM430 fan control
    1x 4-pin fan cable
    3x 3-pin fan cable
    4x 2-pin temperature sensor
    4x screw