Unfortunately, the PC also opposes these efforts in many cases and is annoying with high noise levels during operation. With Tranquility, Kolink offers just the right housing for noise-stricken people. Comprehensive insulation provides protection against loud fans or hard drives. To ensure that the hardware stays cool inside, the Tranquility offers discreet ventilation slots on the front. The insulated cover can optionally be removed, for example if a radiator is installed underneath. The Kolink Tranquility can be trimmed for performance with optimized airflow, but remains nice and quiet due to the additional insulation on the front and side panels. Externally, the gaming case also impresses with its reserved and modern design.
The features of the Kolink Tranquility at a glance
- Soundproof design case for motherboards up to ATX
- Sound insulation on the front and side panels
- Solid, soundproof and removable lid
- Front made of plastic in a brushed aluminum look
- 2x pre-installed 120 mm fans, 6 in total possible
- I / O panel with 2x USB 2.0 / 1x USB 3.0 & HD audio in / out
- Support for radiators up to 240 mm on the front and lid
- 2x 3.5 / 2.5 inch disk slots
- Graphics cards up to 38 cm long & CPU cooler up to 16 cm high
- Comprehensive insulation & two pre-installed fans
The solid chassis is made of one millimeter thick SECC steel. Both side parts and the front are lined with insulation mats. The solid lid is also insulated, but can also be completely removed, for example to improve the airflow. Because underneath, a 240 mm radiator can be attached like on the front. On the front, in the look of brushed aluminum, there are two subtle ventilation slots on the side for the air supply. A 240 radiator can also be accommodated there.
In order to ensure ventilation of the hardware installed in the housing, two of six possible 120 mm fans are already included and installed in the housing. One is placed in the lowest of three possible places behind the front, the second in the only place on the back. Two additional 120 mm fans can be installed under the lid.
Dust filters keep the Kolink Tranquility clean
The entire interior is coated in black and provided with a power supply cover to achieve a particularly clean look. There is space for a permanently installed hard drive cage with brackets for two 3.5 or 2.5 inch drives and the power supply. A holder for a total of two 2.5-inch drives is attached to the back of the mainboard tray. The mainboard tray and the cover of the power supply offer numerous openings for sophisticated cable management. At the bottom there is a removable dust filter for the power supply.
Pixel cars can be up to 38 centimeters long and CPU coolers can be up to 16 centimeters high. In addition, the I / O panel placed on the front has two USB 2.0 ports and a USB 3.0 type A port. There is also a cut-out for a switch to control the RGB lighting, but this is not included in the housing and must be retrofitted separately.
Dimensions: 201 x 435 x 400 mm (W x H x D)
Material: steel, plastic
Weight: approx.5.9 kg
Form factor: ATX, Micro-ATX, Mini-ITX
Total fans possible:
3x 120 mm (front)
2x 120 mm (lid)
1x 120 mm (back)
1x 120 mm (front)
1x 120 mm (back)
1x 240 mm (front)
1x 240 mm (lid)
2x 3.5 / 2.5 inches (internal)
2x 2.5 inches (internal)
Power supply: 1x standard ATX (optional)
Expansion slots: 7
I / O panel:
2x USB 2.0 (internal connection)
1x USB 3.0 (internal connection)
1x per audio in / out
Maximum graphics card length: 380 mm
Maximum CPU cooler height: 160 mm