Kolink Stronghold Midi Tower, Tempered Glass - Black Window [STRONGHOLD]

The extremely chic Midi Tower Stronghold comes from Kolink with a stylish side panel made of tempered glass and a front panel made of plastic with an attractive brushed aluminum look. There is plenty of room for presentable hardware in the tidy interior of the Stronghold. Pre-installed dust filters, extensive space for water cooling and practical cable management are just a few of the highlights of this Kolink housing, which is inexpensive despite its high-quality workmanship.

The features of the Kolink Stronghold at a glance
- Design case for mainboards up to E-ATX
- Side panel made of 4 mm thick tempered glass
- Plastic front with a brushed aluminum look
- 2x pre-installed 120mm fans, 6 possible in total
- I/O panel with 2x USB 2.0 / 1x USB 3.0 & HD audio in/out
- Support for radiators up to 280mm
- 2x 3.5/2.5 inch disk slots
- Graphics cards up to 38 cm in length & CPU coolers up to 16 cm in height

Side panel made of tempered glass & two pre-installed fans
The solid chassis consists of one millimeter thick SECC steel and is covered with a four millimeter thick tempered glass side panel and a plastic front with a stylish brushed aluminum look. The entire interior is coated black and fitted with a power supply cover to achieve a particularly clean look. This accommodates a permanently installed hard drive cage with brackets for two 3.5 or 2.5 inch drives and the power supply unit.

In order to ensure ventilation of the hardware installed in the housing, two of six possible 120 mm fans with Molex connectors are already included and installed in the housing. One is placed in the lowest of three possible places behind the front, the second in the only place at the back. Two more 120 mm fans can be installed under the cover.

Dust filters keep the Kolink Stronghold clean
The mainboard tray and the power supply cover offer numerous openings for sophisticated cable management. A 240mm radiator can be accommodated in the front and top of the Observatory housing. Ventilation openings with fine dust filters are located in the cover and on the underside of the housing. They can be removed without tools and are reinforced with a filigree honeycomb pattern.

Pixel cars can be up to 38 centimeters long and CPU coolers up to 16 centimeters high. In addition, the I/O panel on the front has two USB 2.0 ports and a USB 3.0 Type A port. There is also a recess for a switch to control the RGB lighting, but this is not included with the case and must be retrofitted separately.

Technical details:
Dimensions: 201 x 435 x 435 mm (W x H x D)
Material: steel, tempered glass
Weight: approx. 5.75 kg
Color: Black
Form factor: E-ATX (up to 279 mm wide), ATX, Micro-ATX, Mini-ITX
Total possible fans:
3x 120 mm (front)
2x 120 mm (lid)
1x 120 mm (rear)
Pre-installed:
1x 120 mm Molex (front)
1x 120 mm Molex (rear)
Radiator mounts:
1x 280 mm (front)
1x 240 mm (lid)
Filter: top, bottom
Drive bays:
2x 3.5/2.5 inch (internal)
Power supply: 1x standard ATX up to 200 mm (optional)
Expansion slots: 7
I/O panel:
2x USB 2.0 (internal connection)
1x USB 3.0 (internal connection)
1x per audio in/out
Maximum graphics card length: 380 mm
Maximum CPU cooler height: 160mm