Kolink Stronghold Barricade Midi-Tower - Gunmetal Gray [STRONGHOLD BARRICADE]

This metal chassis features two Kolink Classic PWM fans and the iconic hexagonal mesh design that ensures effective natural airflow. With its user-friendly and screwless design, installing hardware in this case is a breeze. The Stronghold Barricade can accommodate an E-ATX motherboard, a 330mm GPU and a 165mm CPU cooler, making it perfect for your powerful high-end hardware.

The features of the Kolink Stronghold Barricade Midi-Tower at a glance:
Slim and elegant metal and plastic housing in Gunmetal Gray
User-friendly, screwless design with a steel frame and metal and glass cladding
Supports up to E-ATX motherboards, 330 mm GPUs and 165 mm CPU coolers
Two integrated Classic PWM 120 mm fans, up to six fans possible
Hinged tempered glass panel and removable cover plate for easy installation
Ventilated panels for optimal air circulation and heat dissipation
Suitable for AiO coolers up to 360 mm

User-friendly
The Stronghold Barricade has been designed so that the interior is easily accessible and expandable. Due to the screwless design, the upper and side walls are quickly removable, with the tempered glass pane being hinged to allow quick access to the inside of the housing. The tempered glass plate can be easily opened with the help of the magnetic pulley. This allows you to easily install a comprehensive range of high-quality gaming hardware in this midi tower. The Stronghold Barricade supports motherboards from Mini-ITX to E-ATX and is therefore not limited in the size of the motherboard.

Most high-end graphics cards also fit, as there is room for a GPU up to 330mm in length. In addition, there is room for a CPU cooler with a height of up to 165 mm. The entire enclosure offers excellent cable routing options to make your enclosure look clean and tidy. There is no tangle of cables in a Kolink housing.

Airflow and cooling
With our iconic hexagonal mesh pattern that spans the entire case, the Stronghold Barricade already offers a comprehensive airflow. This is reinforced by two Kolink Classic PWM 120 mm fans, one of which is mounted on the back and the other centrally on the front. These seven-bladed fans are equipped with a hydraulic bearing and ensure consistent performance and high reliability. In addition, there are two additional fan slots at the front, to which you can attach fans up to 140 mm in size. The Stronghold Barricade is designed to use AiOs to further increase cooling potential.

There are a total of three slots for radiators, and thus the option to accommodate more than one complete water cooling. There is space for a 360 mm radiator at the front, a 240 mm radiator on the lid and a 120 mm radiator at the back. Thanks to the comprehensive cooling support in this housing, your hard-working components remain at the optimum temperature.

Attractive and flexible
To power your gaming PC, the Stronghold Barricade offers space for a power grid up to 190 mm long, which is housed under a ventilated power supply cover. Underneath the PSU shroud is the drive bay, which can hold either two 3.5-inch or 2.5-inch disks. Two additional 2.5-inch drives can be attached to the back of the motherboard tray. Thanks to this flexibility, you can put together an optimal storage solution that gives you a perfect balance between capacity and speed. For its exterior, the Stronghold Barricade uses metal and plastic panels in Gunmetal Gray.

The I / O panel on the top of the case offers a USB 3.1 port, two USB 2.0 ports and HD audio jacks, completing this elegant midi tower. To facilitate cable management and not interrupt the uniform mesh design, these connectors are located on the side of the panel.

Technical details:
Dimensions: 370 x 216 x 470 mm (L x W x H)
Material:
0.7
mm steel side
door
made of tempered glass metal and plastic lid made of mesh
Weight: 7.2 kg
Color: Gunmetal Gray
Form factor: E-ATX, ATX, Micro-ATX, Mini-ITX
Total fan possible:
3x 120 / 2x 140 mm (front)
2x 120
/ 140 mm (lid) 1x 120 mm (back)
Of which pre-installed:
1x Classic 120
mm PWM (front) 1x Classic 120 mm PWM (back)
Radiator Mountings:
1x 360
mm (front) 1x 240 mm (lid)
1x 120 mm (back)
Drive bays:
2x 2.5 / 3.5 inch
2x 2.5 inch
Power supply: 1x standard ATX (optional)
Expansion slots: 7
I / O panel:
2x USB 2.0
1x USB
3.1 HD audio
Maximum graphics card length: 330 mm
Maximum CPU cooler height: 165 mm
Maximum power supply length: 190 mm