Kolink Satellite Plus Mini-ITX / Micro ATX housing - black [SATELLITE PLUS]

A pre-installed fan and many mesh and mesh surfaces ensure sufficient cooling of the components and high-quality materials create a premium look.
Exterior brushed aluminum for a premium look

The complete exterior of the Satellite Plus consists of black aluminum with a chic brushed surface, while the basic stand is made of robust steel. The I / O panel in the front edge of the right-hand side is equipped with two USB 3.0 ports and includes two audio connectors (In / Out), status LED indicators and the reset button. The power button is located on the otherwise discreetly untouched front. On both sides of the housing are ventilation grilles for cooling the components or as exhaust air opening for the power supply.
More space than you think: gaming hardware and up to 4 SSDs

Depending on the size of the built-in ATX power supply, dual-slot graphics cards with a length of up to 280 mm can be installed in this small case. An up to 220 mm long power supply restricts the GPUs to 190 mm, with a PSU up to 140 mm, a graphics card up to 280 mm can be installed. CPU coolers have impressive 165mm in height, which can be mounted on a mini ITX motherboard or certain micro ATX motherboards.

Attention: Only extremely compact Micro ATX motherboards with a maximum of three expansion slots and the dimensions 22.6 cm x 18.0 cm can be installed!

Up to four fast 2.5-inch SSDs can be found at two brackets at home, but can also yield up to three 3.5-inch hard drives. One of these brackets is located under the lid and either suspends two SSDs or two HDDs, while the left-side bracket can accommodate two 2.5-inch drives or a single 3.5-inch hard drive.

A single 120 mm casing fan is installed in the rear and two hose openings are located above the two PCI screens for external water cooling. The combination of discreet design and extensive hardware support makes the Satellite Plus an insider tip among the mini-performance housings.

Technical details:
Dimensions: 260 x 190 x 280 mm (W x H x D)
Material: steel (chassis), aluminum (outside)
Weight: approx. 2.1 kg
Color: Black
Form Factor: Mini-ITX, Micro-ATX (Attention: maximum 22.6 x 18.0 cm!)
Total fan possible:
1x 120 mm (rear side)
Pre-installed:
1x 120 mm (rear side)
Drive Shafts:
3x 3.5 inches (internal)
4x 3.5 inches (internal)
Power supply: 1x standard ATX (optional)
Expansion slots: 2
I / O panel:
2x USB 3.0
2x Audio In / Out
1x Power button
Maximum graphics card length: 280 mm
Maximum CPU cooler height: 165 mm
Maximum net length: 140 mm (with GPU up to 190 mm) / 220 mm (with GPU over 190 mm)