Kolink Quantum RGB Midi-Tower, Tempered Glass - black [QUANTUM]

A powerful gaming setup based on an E-ATX mainboard can be admired through a tempered glass side panel, a power supply cover conceals unsightly cable clutter. The front is provided with a diagonal mesh cut-out, which ensures an optimized airflow. The cutout is equipped with a digitally addressable RGB LED strip, a pre-installed 120 fan, also with digitally addressable RGB LEDs, already ensures a cooled interior. The lighting can be controlled via a switch on the I / O panel. Alternatively, the strip and the fan can also be connected and controlled directly on a mainboard. A honeycomb mesh with an integrated magnetic dust filter on the top serves for additional ventilation.

The features of the Kolink Quantum Midi-Tower at a glance:
- Chic midi tower for motherboards up to E-ATX format
- Tempered glass side panel
- Diagonal mesh front
- Subtle digitally addressable RGB lighting on the front
- A pre-installed 120 mm fan with digitally addressable RGB LEDs on the back
- Up to five 120 mm fans in total possible
- Space for graphics cards up to 340 millimeters, CPU cooler up to 155 millimeters
- I / O panel with control for RGB LEDs, 1x USB 3.0 and 1x USB 2.0
- Kolink Quantum: Lots of space for powerful gaming hardware

Even if the external dimensions correspond to a midi tower, thanks to its sophisticated design, the Quantum is designed to accommodate a mainboard even in E-ATX format. There is also plenty of room for graphics cards with 340 millimeters to the front. At 155 millimeters, there is also enough space for common CPU coolers. A cover hides the power supply and the HDD cage, in which two 3.5-inch or two 2.5-inch drives can be installed. Two 2.5-inch SSDs can be attached to the back of the mainboard bracket. A curvature on the right side part provides additional space for the cable management in the slim housing.

If you rely on air cooling, you will find enough slots for 120-millimeter fans. Two 120 millimeter fans can be attached to the front with the mesh cutout and side ventilation slots. Either two 120 millimeter fans can be attached to the lid. The lid is provided with a honeycomb mesh through which air can flow through almost unhindered. A magnetic dust filter ensures that the hardware inside does not have to be constantly cleaned. On the back, a powerful 120 millimeter fan with digitally addressable RGB LEDs already occupies the available slot. There is space for a 240-millimeter radiator on the front, and the pre-installed fan on the back can be replaced by a 120-millimeter heat exchanger.

Tempered glass and RGB LEDs skilfully showcase hardware
Sophisticated cable management can be achieved through well-placed bushings and terminals. The spacious interior can be admired through the tempered glass side panel. The diagonal mesh cutout including dust filter on the front is illuminated by a strip with digitally addressable RGB LEDs. A switch on the I / O panel, which can also control the lighting of the rear fan, is responsible for its control, including lighting effects. Alternatively, the RGB lighting of the strip and the fan can also be connected and controlled directly on the mainboard. Then the RGB switch on the I / O panel can also be used as a reset button. In addition to the RGB / reset switch, there is also a USB 3.0 slot and a USB 2.0 port as well as 3.5 millimeter sockets for headphones and microphone and finally a power and an HDD LED.

Technical details:

Dimensions (H x W x D): 443 x 191 x 467 mm
Material: steel, tempered glass, plastic
Weight: approx.5.7 kg
Color: Black
Form factor: E-ATX, ATX, Micro-ATX, Mini-ITX
Total fans possible:
2x 120 mm (lid)
2x 120 mm (front)
1x 120 mm (back)
Pre-installed:
1x 120 mm back
Radiator Mountings:
1x 240 mm (front)
1x 120 mm (back)
Filters: cover, bottom, front
Drive Bays:
2x 3.5 / 2.5 inch (internal, HDD cage)
2x 2.5 inches (internal, mainboard tray)
Power supply: 1x standard ATX (optional)
Expansion slots: 7
I / O panel:
1x USB 3.0 type A (internal connection)
1x USB 2.0 (internal connection)
1x per audio in / out
1x RGB / reset switch
Maximum graphics card length: 340 mm
Maximum CPU cooler height: 155 mm
Maximum power supply depth: 200 mm