Kolink Outline RGB midi tower, tempered glass - black [OUTLINE]

With the outline, Kolink complements its range of powerful high-end enclosures, which shine in terms of both functionality and design. A high-end mainboard in the form factor SSI-EEB has room in the spacious interior, graphics cards can be up to 360 millimeters long and can also be installed vertically. Of course, there is also plenty of room for extensive cooling: a radiator with a length of 360 millimeters can be attached to the front and a heat exchanger on the lid can be 240 millimeters long. The design of the front is particularly memorable. On the left are subtle but effective ventilation slots in a checkerboard pattern, on the right is a digitally addressable RGB LED strip in the form of a narrow rectangle. A pre-installed, powerful 120 fan, whose digitally addressable RGB LEDs illuminate the interior of the spacious midi tower, already provides cooling. Built-in hardware can be admired through a tempered glass side panel.

The features of the Kolink Outline Midi-Tower at a glance:
- Chic midi tower for mainboards up to SSI-EEB format
- Tempered glass side panel for an unobstructed view inside
- Digitally addressable RGB LED strip on the front
- Radiator up to 360 mm on the front, up to 240 mm on the lid
- A pre-installed 120 mm fan on the back with digitally addressable RGB LEDs
- Up to six 120 mm fans in total possible
- Space for graphics cards up to 360 millimeters, vertical installation possible
- CPU cooler up to 162 millimeters
- I / O panel with control for RGB LEDs, 1x USB 3.0, 2x USB 2.0 and HD audio
- Lots of space for gaming hardware in the Kolink Outline

Even if the external dimensions correspond to a midi tower, the Kolink Outline is designed thanks to its sophisticated design to accommodate a mainboard even in SSI-EEB format. There is also enough space for graphics cards with 360 millimeters to the front. There are also two slots for vertical installation. At 162 millimeters, there is also enough space for common CPU coolers. A cover hides the power supply and the HDD cage, in which two 3.5-inch or two 2.5-inch drives can be installed. Two 2.5-inch SSDs can be attached to the back of the mainboard bracket.

If you rely on air cooling, you will find enough slots for 120-millimeter fans. Two 120 millimeter fans can be attached to the lid. The lid is provided with a mesh through which air can flow almost unhindered. Here too, a dust filter ensures that the hardware inside does not have to be constantly cleaned. The front can hold up to three 120 millimeter fans. At the back, a powerful 120 millimeter fan already occupies the available slot. The pre-installed fan is also equipped with digitally addressable RGB LED lighting. Corresponding radiators can of course be installed instead of the fans, a 240 radiator on the cover and a 360 radiator on the front.

Tempered glass and RGB LEDs skilfully showcase hardware
The power supply cover ensures a tidy look inside the case. Sophisticated cable management can be achieved through well-placed bushings and terminals. The chic interior can be admired through a tempered glass side panel. A striking strip with digitally addressable RGB LEDs is attached to the front. Its lighting can be controlled via a switch on the I / O panel, or the strip can also be connected directly to a mainboard and controlled directly.

The lighting on the pre-installed fan is also via a corresponding 3-pin connector (5VDG), which can also be controlled via the controller on the I / O panel or via the mainboard. Then the RGB switch on the I / O panel can also be used as a reset button. In addition to the RGB / reset switch, there are also one USB 3.0 and two USB 2.0 slots as well as 3.5 millimeter sockets for headphones and microphone as well as a power and an HDD LED.

Technical details:
Dimensions (H x W x D): 415 x 210 x 440 mm
Material: steel, tempered glass, plastic
Weight: approx.5.9 kg
Color: Black
Form factor: SSI-EEB, E-ATX, ATX, Micro-ATX, Mini-ITX
Total fans possible:
2x 120 mm (lid)
3x 120 mm (front)
1x 120 mm (back)
Pre-installed:
1x 120 mm back
Radiator Mountings:
1x 240 mm (lid)
1x 360 mm (front)
1x 120 mm (back)
Filter: cover, bottom
Drive Bays:
2x 3.5 / 2.5 inch (internal, HDD cage)
Power supply: 1x standard ATX (optional)
Expansion slots: 7 + 2
I / O panel:
2x USB 2.0 (internal connection)
1x USB 3.0 (internal connection)
1x per audio in / out
1x RGB / reset switch
Maximum graphics card length: 360 mm
Maximum CPU cooler height: 162 mm
Maximum power supply length: 180 mm