The no-frills front offers a 5.25-inch slot and air inlets on the right side. With its functional interior, in which a graphics card up to a length of 335 millimeters can be accommodated, the Kolink KLA-003 is ideally suited for use in a productive environment.
The features of the Kolink KLA-003 at a glance:
- For mainboards up to the form factor ATX
- 5.25-inch slot, space for 2 x 3.5-inch HDD or 4 x 2.5-inch SSD
- A pre-installed 80mm fan on the back
- Supports ATX power supplies, the slot is at the top at the back
- The interior is completely black
- I / O panel with 1x USB 3.0, 2x USB 2.0, audio in / out
- Graphics cards up to 335mm, CPU coolers up to 160mm and radiators up to 240 mm on the front
Kolink KLA-003: Simplicity meets functional design
The Kolink KLA-003 is a compact midi tower, behind whose external dimensions of 365 x 175 x 410 millimeters one would hardly expect such a spacious interior. With a lot of space for hardware, a high-performance system for the productive environment can be created in the inexpensive housing, be it in the office or home office. In addition to the pre-installed fan on the back, a 120 mm fan can be attached to the side panel and two additional 120 mm fans on the front, which ensure good airflow. The latter can also be replaced by a 240 mm radiator. The air inlets on the right-hand side of the simple front, which is also equipped with a 5.25-inch slot, provide enough fresh air.
The case accommodates mainboards in the form factor ATX, Micro-ATX or Mini-ITX form factor. Graphics cards can be up to 335 millimeters long and CPU coolers up to 160 millimeters high. In the Kolink KLA-003, two HDDs or SSDs can be accommodated in the drive cage. Two more SSDs can be attached to the front or rear of the mainboard tray directly next to the main board. At 21 millimeters, there is enough space for cable management on the back of the mainboard tray.
Beyond functionality, the Kolink KLA-003 has a simple but professional-looking exterior with its housing made entirely of steel and the simple front. The I / O panel on the cover has a USB 3.0 slot and two USB 2.0 sockets. In addition to the power and reset buttons, there are also the usual sockets for headphones and microphone.
Technical details:
- Dimensions: 175 x 410 x 365mm (W x H x D)
- Weight: approx. 4.1 kg
- Material: steel, plastic
- Color: Black
- Form factor: ATX, Micro-ATX, Mini-ITX
- Total fans possible:
- 2x 120mm (front)
- 1x 120mm (side part)
- 1x 80 mm (rear)
- Pre-installed:
- 1x 80 mm (rear)
- Total radiators possible:
- 1x 240 mm (front)
- Drives:
- 1x 5.25-inch (external, front)
- 2x 2.5 / 3.5 inch (internal, drive cage)
- 2x 2.5-inch (internal, mainboard tray)
- Power supply: 1x standard ATX (optional)
- Expansion slots: 7
- I / O panel:
- 1x USB 3.0
- 2x USB 2.0
- 1x audio in / out
- Max. Graphics card length: approx. 335mm
- Max. CPU cooler height: approx. 160mm