Kolink K6T Micro-ATX Housing - black Window [K6T]

These LED strips pulsate in seven colors and resemble the effect that arises when a diamond breaks the light. The hardware inside the small piece of jewelry can be admired through a large, angled window.
The Kolink K6T Micro-ATX housing in the overview:

Stylish hexagon design with LED lighting
RGB LEDs with 7 colors & pulsating effect
Space for a 120 mm radiator
Up to 27 cm long graphics cards
Large window in the left side part
Kolink K6T: Micro ATX case in diamond shape

The chassis of the Kolink K6T Micro ATX housing can accommodate a graphics card up to a length of 270 mm and the power supply (up to 240 mm) is mounted on the chassis. This is due to the spacious panel of the tower, which gives the case the hexagonal shape. The power cable of the power supply is routed under the rear top cover and, together with the other cables (for the mouse, keyboard and monitor), are passed through an opening in the lower, angled area of the rear side.

A 120mm fan or radiator can be accommodated in the front of the chassis, while CPU coolers may be up to 155m high. An 80 mm fan is pre-installed in the rear panel. The I / O panel is located on the right side of the upper front panel and is equipped with a USB 3.0 port and a USB 2.0 port. The Kolink K6T is indeed a real little gem among the Micro ATX housings and a very special accommodation for powerful gaming hardware.

Technical details:
Dimensions: 190 x 400 x 453 mm (W x H x D)
Material: steel, plastic
Weight: approx. 4 kg
Color: Black
Form Factor: Micro-ATX
Total fan possible:
1x 120 mm (front)
1x 80 mm (rear side)
Pre-installed:
1x 80 mm (rear side)
Filter: Ground (removable)
Radiator Mountings:
1x max. 120 mm (front)
Drive Shafts:
1x 3.5 inches (internal)
1x 2.5 inches (internal)
Power supply: 1x standard ATX (optional)
Expansion slots: 4
I / O panel:
1x USB 3.0
1x USB 2.0
1x each audio in / out
Maximum graphics card length: 270 mm
Maximum PSU length: 240 mm
Maximum CPU cooler height: 155 mm