Kolink Inspire K2 A-RGB Micro-ATX case, tempered glass - black [INSPIRE K2 ARGB]

Together, the front is reminiscent of a printed circuit board or a scene from the Tron films. The almost camouflaged recesses also serve to supply air. The side part made of tinted tempered glass allows a look inside, for example on a micro-ATX mainboard. The Micro-ATX case also fits powerful hardware and enough drives to accommodate an optimal gaming system. This makes the Kolink Inspire K2 the ideal housing for bargain hunters with a sense of unusual design.

The Kolink Inspire K2 Micro-ATX case at a glance:
- Strikingly designed front with RGB lighting
- Tempered glass side panel and power supply slot on the top
- 1x pre-installed 92 mm fan on the back
- Space for 1x 120 mm fan on the front
- Space for graphics cards up to 320 mm long and CPU coolers up to 150 mm
- I / O panel with one USB 3.0, one USB 2.0 and RGB LED control
- At 3.9 kilograms, it is particularly light and portable
- Inexpensive Micro-ATX case from Kolink for gamers

The Kolink Inspire K2 is a very affordable micro ATX case that is suitable for style-conscious gamers. It can hold graphics cards up to 32 cm long. Particularly striking is the front with the pyramid-like curvature and the recesses, which are reminiscent of conductor tracks on a circuit board, through which air enters the interior of the housing. The front is accentuated by a partially translucent strip, behind which a digitally addressable RGB LED strip is attached. On the top of the front cover is the I / O panel with the USB 2.0 and USB 3.0 connection as well as the control for the RGB lighting. A side part made of tinted tempered glass rounds off the stylish design of the Inspire K2.

Inside there is space for a Micro-ATX or a Mini-ITX mainboard. Installed graphics cards can be 320 millimeters long, for CPU coolers with 150 millimeters there is enough space for most common models. The right side cover is curved for cable management. A 120 fan can be accommodated on the front. A 92 mm fan is already preinstalled on the back.

There are two slots at the front at the top, a 3.5 or 2.5 inch drive has space in the top. Below this, a 2.5-inch SSD can be accommodated in the second slot. A 3.5 or 2.5 inch drive can also be screwed to the floor.

Technical details:
Dimensions: 382 x 188 x 393 mm (W x H x D)
Material: steel (housing), tempered glass (side part), plastic (front)
Weight: approx.3.9 kg
Color: Black
Form factor: Micro-ATX, Mini-ITX
Total fans possible:
1x 120 mm (front)
1x 92 mm (back)
Pre-installed:
1x 92 mm (back)
Radiator Mountings:
1x max. 120 mm (front)
Drive Bays:
2x 3.5 / 2.5 inches max. (internal, upper cage, floor)
1x 2.5 inch max. (internal, lower cage)
Power supply: 1x standard ATX (optional)
Expansion slots: 4
I / O panel:
1x USB 3.0
1x USB 2.0
2x 3.5 mm jack (1x audio in / out)
RGB control
Maximum graphics card length: 320 mm
Maximum CPU cooler height: 150 mm