Kolink Inspire K1 RGB Midi Tower, Tempered Glass - Black [INSPIRE K1]

Now comes the extremely chic Midi-Tower Inspire K1 RGB with stylish side panel made of acrylic glass and front of tempered glass. Behind the front are two pre-installed 120mm RGB LED fans whose lighting is particularly broken and accentuated by a honeycomb frame. The RGB LED fans are connected to an enclosed controller. An infrared remote control can be used to control the RGB LED lighting. The tidy interior of the Inspire K1 has plenty of room for presentable hardware. Sufficient space for water cooling and practical cable management are just a few of the highlights of this, despite its high-quality workmanship affordable housing of Kolink.

The features of the Kolink Inspire K1 RGB at a glance
- Design housing for motherboards up to ATX
- Side part made of acrylic glass and front made of tempered glass
- 2x pre-installed 120mm RGB LED fan, 1x 80mm fan on the back
- I / O Panel with 2x USB 2.0 / 1x USB 3.0 & HD Audio In / Out
- Support for a radiator in 240 mm format
- 3x 3.5 and 2x 2.5 inch disk slots
- Graphics cards up to 35 cm in length & CPU cooler up to 15 cm in height
- Including fan controller and remote control
- Tempered glass front and three pre-installed fans

The solid chassis is made of one-millimeter-thick SECC steel and is lined with a side panel made of lightweight acrylic glass and a tempered glass front. The power supply is mounted at the top back, while the front is under the HDD cage with space for up to two hard drives. Another HDD can be installed on the back wall of the mainbaord tray. Alternatively, two 2.5-inch SDDs can be accommodated there. There is also enough room for cable management.

To ensure the ventilation of the installed hardware, two 120 mm fans with RGB LED lighting are already installed on the front. At the back there is another pre-installed 80mm fan, which removes the waste heat from the spacious housing. The two front fans are connected to their 6-pin connectors on the enclosed controller. An enclosed remote control can be used to set up to 350 different effects. Overall, the controller has room for six more fans and two RGB LED strips, which are not included in the case. If you prefer a water cooling system instead, you can attach a 240 mm radiator to the front.

Pixel cars may be up to 35 inches long and CPU cooler up to 15 inches high. In addition, the front panel I / O panel has two USB 2.0 ports and a USB 3.0 Type A port.

Technical details:
- Dimensions: 175 x 350 x 410 mm (W x H x D)
- Material: steel, acrylic glass, tempered glass
- Weight: about 3.5 kg
- Color: Black
- Form factor: ATX, Micro-ATX, Mini-ITX

Total possible fan:
- 2x 120 mm (front)
- 1x 80 mm (back)

Preinstalled:
- 2x 120mm RGB LED PWM fan (front)
- 1x 80 mm fan (rear)

Radiator Mountings:
- 1x 240 mm (front)

Drive Bays:
- 3x 3.5 inches (internal)
- 2x 2.5 inches (internal)
- Power supply: 1x standard ATX up to 160 mm (optional)
- Expansion Slots: 7

I / O panel:
- 2x USB 2.0 (internal connection)
- 1x USB 3.0 (internal connection)
- 1x each audio in / out
- Maximum graphics card length: 350 mm
- Maximum CPU cooler height: 150 mm