Kolink Core RGB 80 PLUS power supply - 600 watts [KL-C600RGB]

The features of the Kolink Core RGB 600 Watt at a glance:
- 480 watts and 40 amps on the 12 volt rail
- 80 PLUS certificate for high efficiency
- ATX form factor with a length of 140 mm
- Modern look with flat, all-black cables
- Stylish, digitally addressable RGB-LED lighting
- Connections: 1x 24-pin, 1x 4 + 4-pin, 2x 6 + 2-pin, 5x SATA, 3x Molex
- Kolink Core RGB 80 PLUS: High efficiency and performance

Like the counterparts without RGB-LED lighting, the core power supply units are certified according to the 80 PLUS standard, which guarantees a power efficiency of more than 82 percent at a load of 20 percent at 230 volts. All models in the Core series also meet the requirements of EU Regulation No. 617/2013 for safe operation on the European 230 volt network. Kolink Core power supplies also offer an efficient and cost-effective solution for powering a system because they meet the prescribed requirements for standby power consumption.

This 600 watt model has a 4 + 4-pin EPS12V connector for the CPU, two 6 + 2-pin connectors for graphics cards and a 20 + 4-pin ATX connector for the motherboard. Five SATA and three Molex connections are available for additional components. The Core 600 ARGB power supply can thus easily supply everything from a midrange to a performance system with power.

The digitally addressable RGB-LED lighting of the Kolink Core 600 ARGB can be adjusted by pressing a button on the power supply unit. Alternatively, it can be connected to a standard 3-pin connector (5VDG) on the motherboard and controlled using the motherboard manufacturer's software. The power supply unit also comes with an additional sticker with which the RGB-LED side panel can be designed as an alternative. The completely black ribbon cables of the non-modular power supply complement the bright LEDs and also make cable management easier.
Note:
For the good of the environment, the manufacturer does not include an IEC cable for the mains connection.

Technical details:
- Dimensions: 150 x 86 x 140 mm (W x H x D)
- Color: Black
- Fan: 120 mm (automatic control)
- Efficiency: at least 80% at 50/20/100% load, 80 PLUS certified
- Active PFC (0.9)
- Form factor: ATX12V 2.3
- Nominal power: 600 W.
- +3.3 V: 18 A
- +5 V: 15 A
- +3.3 V / + 5V: 100 W.
- +12 V: 480 W / 40 A
- -12 V: 0.3 A / 3.6 W.
- +5 Vsb: 2.5 A / 12.5 W.
Connections fixed):
- 1x 20 + 4 pin
- 1x 4 + 4-pin (CPU / ATX12V / EPS12V)
- 2x 6 + 2-pin PCIe
- 5x SATA
- 3x 4-pin Molex
Protection circuits:
- OVP / UVP (protection against overvoltage and undervoltage)
- SCP (short circuit)
- OPP (overload)
- OCP (overcurrent on rails +12, +3.3 and +5 volts)
- Manufacturer's guarantee: 2 years