SPECIAL OFFER Kolink Bastion RGB Midi-Tower, Tempered Glass - white [BASTION WHITE RGB]

The color scheme is complemented by a rear fan with digitally addressable RGB LEDs. The lighting can be controlled via a switch on the I / O panel. A lot of powerful hardware fits into the spacious interior. And a fine mesh with integrated dust filter on the top ensures proper ventilation.

The features of the Kolink Bastion Midi-Tower at a glance:
- Chic midi tower for motherboards up to E-ATX format
- Tempered glass side panel with hinges
- Subtle digitally addressable RGB lighting on the power supply cover
- A pre-installed 120 mm fan on the back with digitally addressable RGB LEDs
- Up to five 120 mm and two 140 mm fans in total possible
- Space for graphics cards up to 370 millimeters, CPU cooler up to 160 millimeters
- I / O panel with control for RGB LEDs, 1x USB 3.0 and 2x USB 2.0
- Lots of space for gaming hardware in the Kolink Bastion

Even if the external dimensions correspond to a midi tower, thanks to its sophisticated design, the bastion is designed to accommodate a mainboard even in E-ATX format. There is also enough space for graphics cards with 370 millimeters up to the front. At 160 millimeters, there is also enough space for common CPU coolers. A cover hides the power supply and the HDD cage, in which two 3.5-inch or two 2.5-inch drives can be installed. Two 2.5-inch SSDs can be attached to the back of the mainboard bracket.

If you rely on air cooling, you will find enough slots for 120-millimeter fans. Two 120 mm fans can be attached to the power supply cover, a removable air filter under the power supply ensures dust-free. Either two 120 mm or two 140 mm fans can be attached to the lid. The lid is provided with a mesh through which air can flow almost unhindered. Here too, a dust filter ensures that the hardware inside does not have to be constantly cleaned. At the back, a powerful 120 millimeter fan already occupies the available slot. The pre-installed fan is also equipped with front and rear digitally addressable RGB LED lighting. Corresponding radiators can of course be installed instead of the fans.

Tempered glass and RGB LEDs skilfully showcase hardware
The mainboard tray is a real eye-catcher. Instead of boring rectangles and rectangles, for example, the recess behind the mainboard can be seen in the form of a trapezoid. Sophisticated cable management can be achieved through well-placed bushings and terminals. The chic interior can be admired through a tempered glass side door, which can also be lifted out by the hinges. A strip with digitally addressable RGB LEDs is attached to the front of the power supply cover. A cover made of acrylic milk glass ensures subtle light scattering. A switch on the I / O panel is responsible for controlling it, including lighting effects.

The lighting on the pre-installed fan is also via a corresponding 3-pin connector (5VDG). Both can be connected to the two slots on the controller on the I / O panel. There is also a 3-pin socket on the fan to which further RGB components can be connected. Alternatively, the strip and fan can be connected to a corresponding 3-pin connector on the mainboard and controlled via the mainboard software. Then the RGB switch on the I / O panel can also be used as a reset button. In addition to the RGB / reset switch, there are also one USB 3.0 and two USB 2.0 slots as well as 3.5 millimeter sockets for headphones and microphone as well as a power and an HDD LED.

Technical details:
Dimensions (H x W x D): 482 x 200 x 397 mm
Material: steel, tempered glass, plastic
Weight: approx.5.9 kg
Color white
Form factor: E-ATX, ATX, Micro-ATX, Mini-ITX
Total fans possible:
2x 120/140 mm (lid)
2x 120 mm (power supply cover)
1x 120 mm (back)
Pre-installed:
1x 120 mm back
Radiator Mountings:
1x 240/280 mm (lid)
1x 240 mm (power supply cover)
1x 120 mm (back)
Filter: cover, bottom
Drive Bays:
2x 3.5 / 2.5 inch (internal, HDD cage)
2x 2.5 inches (internal, mainboard tray)
Power supply: 1x standard ATX (optional)
Expansion slots: 7
I / O panel:
2x USB 2.0 (internal connection)
1x USB 3.0 (internal connection)
1x per audio in / out
1x RGB / reset switch
Maximum graphics card length: 370 mm
Maximum CPU cooler height: 160 mm