The whole set consists ultimately of three parts. The heat sink is directly on the CPU into place, from where it is connected by the massive pre-assembled hose system with the radiator. In turn - a major advantage over standard systems! - Be placed freely in the housing, only the hose length of 32 cm sets limits here. If it is attached to the back of the customized 120-LED fan is also still the same to transport the waste heat from the system. The closed cooling system requires no maintenance. Not only is the LED fan in a stylish blue, but also the Intel logo light on the heatsink.
The built-in cooling block pump delivers the power absorbed by the copper base CPU heat directly into the air-cooled radiator, which ensures with its fine slats that the cooling liquid pleasant temperature arrives back at the CPU to feed the cycle again. The fan with PWM 4-pin connector rotates at a speed 800-2200 rev / min and can generate an airflow of up to 125 m³ / h. Thus, the set is each task, grown from silent to maximum power, and with 21 dB (A) at low rotation pleasantly quiet.
The included mounting system is suitable for socket 1366, 1155, 1156, 2011, and also the current 1150th
Radiator Dimensions: 150 x 118 x 37 mm (W x H x D)
Weight: 820 g (complete set)
Fan: 120mm LED (800-2200 rev / min, 21 - 35 dB (A), PWM-controlled, 125 m³ / h)
Connector: 4-pin PWM
Compatibility: Intel Socket 2011, 1366, 1156, 1155, 1150
Hose length: about 32 cm
Manufacturer Warranty: 3 years
Complete water cooling system with easy installation
Pre-charged and maintenance free
High cooling capacity