InWin 925 big tower, RGB, tempered glass - black [925 BLACK]

The InWin 925 is completely black, offers a solid steel chassis, outer panels made of brushed aluminum and side panels made of tempered glass. The manufacturer's logo embedded in the front with addressable RGB lighting is a stylish eye-catcher. There are also three pre-installed 120 series PWM fans from the Sirius series with digitally addressable RGB LEDs, which illuminate the inside of the Big Tower from the rear.

The features of the InWin 925 Big-Tower at a glance:
- Completely black designer housing from InWin
- Outer jacket made of brushed aluminum
- Dark tempered glass side panels
- Three pre-installed 120 mm PWM fans with digitally addressable RGB lighting
 -Space for two 360 triple radiators
- Front panel with USB 3.1 Type C and 2x USB 3.0

InWin 925: Stylish housing with plenty of space for hardware and cooling
InWin has provided the 925 with extensive cooling options. A total of up to nine fans can be installed in the tower: three 120-millimeter fans can be installed on the rear wall, on the lid and on the front. Alternatively, two 140 fans can be attached on the front. Three 120 mm PWM fans from InWin's Sirius Loop ASL series with digitally addressable RGB LEDs are already preinstalled on the back. Up to 200 millimeters in height are provided for CPU coolers.

The installation of a water cooling system was also considered: a 360 radiator can be mounted on the lid and there is space for a 240 or 280 radiator at the factory. If the drive cage in the lower part of the housing is removed, a 360 triple radiator can also be installed in the front.
Plenty of space for hardware components

The mainboard tray has space for boards in E-ATX format with a maximum width of 330 millimeters. The InWin 925 has eight horizontal expansion slots and two additional vertical slots to present a graphics card up to 420 millimeters long through the side panel.

A total of seven drives can be accommodated in the InWin 925: two 3.5-inch drives and two 2.5-inch drives can be accommodated on the back of the mainboard tray. Another 2.5-inch drive can be found on the front of the mainboard tray between the front of the case and the motherboard. There is also a modular power supply cage with two drive carriers for 3.5-inch drives under the power supply cover. A corresponding depth of 140 to 200 millimeters is provided for the ATX power supply.

Material and design
The InWin 925 is completely black. The black steel chassis makes the correspondingly covered cables disappear optically and offers any lighting a high-contrast stage. Front, bottom cover and back are lined with a frame made of black anodized and brushed aluminum, the two side parts made of tempered glass are tinted dark gray and offer a view of the built-in hardware on both sides.

A black manufacturer's logo is embedded in the curved, trapezoidal front, which has digitally addressable RGB lighting. The I / O panel is embedded in the right slant of the front and offers a USB 3.1 Type-C connection, two USB 3.0 Type-A ports, a microphone input, a headphone output and the mandatory power button.

Technical details:
Dimensions: 280 x 570 x 608 mm (W x H x D)
Weight: approx.17.8 kg
Material: steel (chassis), tempered glass (side panels), aluminum (outer frame)
Color: black (outer frame, chassis)
Form factor: E-ATX up to 330 mm, ATX, Micro-ATX, Mini-ITX
Fan (possible):
3x 120 / 2x 140 mm (front)
3x 120 mm (lid)
3x 120 mm (back)
Pre-installed:
3x 120 mm Sirius Loop ASL120 (rear)
Radiator mountings (instead of the fans):
1x max. 240/280 mm (front, 360 mm without HDD cage)
1x max. 360 mm (lid)
Filter: not specified
Drive Bays:
3x 3.5 inches
4x 2.5 inches (4x possible)
Power supply: 1x standard ATX12V (optional)
Expansion slots: 8 + 2 (vertical)
I / O panel:
1x USB 3.1 Type C
2x USB 3.0
2x 3.5 mm jack (1x audio in / out)
1x LED modes
Maximum graphics card length: 420 mm
Maximum CPU cooler height: 200 mm
Maximum power supply length: 140 mm (200 mm without HDD cage)