The presentation of assembled hardware succeeds in such a housing particularly well, because the chassis is "IN WIN" typical very high quality and allows a fancy arrangement of the hardware.
The IN WIN 305 at a glance:
The features of the IN WIN 305 Midi-Tower at a glance:
Huge side window made of tinted tempered glass
Excellent workmanship & quality materials
Vertical attachment of the top fans or the radiator
Space for motherboards with ATX, Micro ATX or Mini ITX form factor
I / O panel with 2x USB 3.0, 2x USB 2.0 and HD audio ports
Sufficient space for a strong air or water cooling
2x 3.5 "& 2x 2.5" drive slots available
Innovative design with clear lines
The IN WIN 305 combines modern look with a noble-looking aesthetics. It was mainly made of high-quality, 1.2 mm thick steel and impresses above all by its huge side window made of tinted tempered glass. The 3 mm thick tempered glass side window can be opened quickly and, above all, without tools by means of a handle on the upper edge. The clean front of the black case is interrupted by the I / O panel embedded in a brushed aluminum application (2x USB 3.0, 2x USB 2.0, power button, HD audio) and the "IN WIN" logo.
Of course, the interior also holds some surprises ready. For example, the power adapter is installed at the top of the case and is located behind a honeycomb-look air-permeable cover. As a result, the motherboard is mounted underneath and allows an effective presentation of the installed hardware. A handy holder for graphics cards is also part of the delivery, because sophisticated pixel accelerators can now bring a lot of weight on the scales. The interior accommodates ATX, micro ATX, and mini-ITX motherboards, CPU coolers up to 160 mm high, graphics cards up to 350 mm in length, and power supplies up to 200 mm in length.
Extensive cooling options and numerous hard disk slots
The cooling concept in the IN WIN 305 is anything but standard. The theory is that "cool" air is sucked from the lower, dust filter protected side and blown out at the top or back. There are a maximum of three 120 mm fans on the floor. The back can accommodate a 120mm fan or a 120mm radiator. The peculiarity of the cooling concept lies in the cover of the power supply unit, because a maximum of three 120 mm fans or a radiator with a size of up to 360 mm can be mounted vertically on the honeycomb structure. The warm air should thus be carried past the power supply by the side wall of the housing (also with honeycomb structure) to the outside. The vertical orientation of the upper cooling components is particularly impressive due to the large side window, however, fans and radiators must not be more than 70 mm high. In order to allow the user complete freedom in the choice of its housing cooling, no fans are included.
Of course IN WIN has also provided enough hard disk slots. On the front of the motherboard tray are two mounts for two 2.5-inch hard drives, which can be optionally supplemented by a third bracket. In addition, there are two additional 3.5 "hard drive brackets on the back of the motherboard tray.
Dimensions: 248 x 500 x 485 mm (W x H x D)
Weight: approx. 11.53 kg
Material: steel (chassis), tempered glass (window), aluminum (I / O application)
Form factor: ATX, Micro-ATX, Mini-ITX
3x 120 mm (lid, vertical)
3x 120 mm (floor)
1x 120 mm (back)
Radiator mountings (instead of the fans):
1x max. 360 mm (lid, vertical)
1x max. 120 mm (back)
Filter: bottom (removable)
2x 3.5-inch slots
2x 2.5-inch slots (3x possible)
Power supply: 1x standard ATX12V (optional)
Expansion Slots: 7
I / O panel:
2x USB 3.0
2x USB 2.0
1x HD audio (In / Out)
Maximum graphics card length: 350 mm
Maximum CPU cooler height: 160 mm
Maximum power supply length: 200 mm