HGC Osmi 3.1 aluminum mini-ITX case - white [OSMIwhite]

Thanks to the tidy interior, powerful gaming hardware can be accommodated in the SFF cuboid. There is enough space between the large base and the case to transport plenty of fresh air inside. It is transported to the outside by an optional 140 fan on the lid with stylish mesh.

The Osmi Case 3.1 Mini-ITX case at a glance:
- Extremely compact dimensions of 18 x 25.5 x 18 centimeters
- Outer shell made of high quality aluminum
- Extremely light weight of only 1.88 kg
- Vertical airflow with slot for a 140 mm fan on the floor
- Accepts mini-ITX format motherboards (all AMD & Intel sockets)
- Supports dual-slot gaming graphics cards up to 17 cm in length
- For powerful SFX or SFX-L power supplies and two 2.5-inch data carriers
- Space for CPU coolers with a maximum height of 70 millimeters
- Ascetic exterior and lots of space inside

With extremely compact dimensions of only 180 by 255 by 180 millimeters (W x H x D), the chic cuboid with a volume of 8.6 liters is just the size of a shoe box. The straightforward concept ensures that a complete gaming PC can be built into it despite this size format: the mini ITX mainboard is attached to the side, and a dual PCI slot for compact graphics cards is punched out on the bottom, which can hold up to May be 170 millimeters long. A riser cable is not required for installation. A gaming PC could hardly be built any simpler and smaller!

Big as a gaming console with more power
On the outside, the innovative miniature impresses with its ascetic design and the flawless processing of the high-quality, powder-coated aluminum. The vertically aligned cuboid with its large base offers an unmistakable look. Accordingly, the simple logo of the manufacturer is on the simple front of the Osmi Case 3.1. The power switch is on the back. The interior is also limited to the space that is necessary for really essential hardware.

The clever cooling concept is similarly spartan. It only needs one pre-installed case fan and takes advantage of the integrated cooling of the built-in hardware, which also saves valuable space at this point. There is a space between the base and the housing itself, through which the waste heat from the installed hardware can escape. It is removed from the housing by an optional 140 mm fan on the bottom. Fresh air gets into the case with its chic mesh through the lid.

Supports dual-slot graphics cards with a length of 17 cm
On the inside, a motherboard in mini ITX format can be accommodated on the right side, on which a CPU with a processor cooler with a maximum height of 7 cm can be kept at temperature. Flat top blower coolers are completely sufficient for cooling due to the ever lower TDP of modern processors. A graphics card is placed directly on the board, no riser cable is required. The Pixelbolide can have a height of 42 millimeters / dual-slot as well as a length of 140 millimeters and a total of 170 millimeters long, whereby plugs are irrelevant for the energy supply.

The power supply of the mini gaming system is guaranteed by a power supply unit in the compact SFX or somewhat longer SFX-L standard, which may be a maximum of 100 millimeters long. A modular example is recommended here so that the tangle of cables is kept within limits during installation. Two 2.5-inch data carriers can still be found in the Osmi Case 3.1 Mini-ITX case behind the mainboard. Mainboards with M.2 slots expand the drive capacities accordingly.

Technical details:
- Dimensions: 180 x 265 x 180 mm (W x H x D)
- Material: aluminum (powder coated)
- Material thickness: 1.5 to 4 mm
- Weight: 1.88 kg
- Volume: 8.6 l
- Color: white (semi-gloss)
- Form factor: Mini-ITX
- Total fans possible:
- 1x 140 mm fan (bottom)
- Drive bays: 2x 2.5 inches
- Power supply: SFX or SFX-L (optional)
- Expansion slots: 2 (dual slot)
- I / O panel:
- Illuminated power button

Hardware compatibility:
- Maximum CPU cooler height: 70 mm
- Maximum graphics card length: 170 mm
- Maximum graphics card width: 140 mm
- Maximum graphics card height: 42 mm (dual slot)
- Maximum power supply length: 100 mm