Fractal design Meshify S2 TG Midi-Tower - white [FD-CA-MESH-S2-WT-TGC]

This variant of the Fractal Designs Meshify series housing is able to accommodate large E-ATX boards. Visually, it stands out with its stylish white-black design and the metal mesh grid, which also serves as a dust filter thanks to its fine structure. The mesh consists of asymmetrically distributed triangles, which are modeled on the surface of diamonds. Thanks to the mesh elements, the Meshify S2 TG enjoys a good airflow inside and can also hold powerful gaming hardware and up to four radiators.

The Fractal Design Meshify S2 TG midi tower at a glance
- Elegant design with large mesh areas - optimized for high airflow
- Stunning view of the hardware through Tempered Glass side panel
- 9 fans possible - 3x 140 mm preinstalled
- Space for up to 420 mm radiator on the bracket in the lid
- Graphics cards up to 440 mm (465 mm without front fan) & CPU cooler up to 185 mm
- Magnetic dust filter on the lid, removable dust filter on the bottom
- 3x 2.5 "/ 3.5" HDDs & 2x 2.5 "SSDs & 2 vertical slots for expansion cards
- Front panel with 1x USB 3.1 Type C, 2x USB 3.0 Type A and Audio In / Out

The Fractal Design Meshify S2 TG midi tower in detail
A large mesh surface dominates the front of the Meshify S2 TG midi tower from Fractal Design, and the asymmetric diamond structure of the metal grid creates an impressive 3D effect. Behind the front, a 280- or 360-mm radiator can be installed and alternatively there is space for two 140-mm fans or three 120-size fans. A large 360 or 420 triple radiator can be installed in the lid. Chassis fans or fans for radiators can be connected to the integrated fan hub, which is powered by a SATA cable and can be connected to a motherboard to receive a tacho signal. Three 4-pin fans and six 3-pin fans can be connected to the hub itself.

Graphics cards with installed front fans may be up to 440 millimeters long, without fans there is 465 millimeters of space. CPU coolers can be installed in the Meshify S2 TG fractal design with a height of up to 185 mm, power supplies can be up to 300 mm long and disappear under a power supply cover. It has a removable flap on the front, for example to make room for a front radiator or to facilitate the installation of fans or a radiator on the floor.

Lots of space for drives and gaming hardware
In addition to E-ATX, ATX, Micro ATX and Mini-ITX motherboards, up to nine expansion cards can be built into the chassis, one of which is in the vertical position using an optional riser card. Three assembly slots for 3.5-inch drives are housed in the Netzeilkammer, these are also providable with 2.5-inch copies. There are also two dedicated 2.5-inch bays directly on the back of the mainboard tray. Alternatively, the brackets for the 2.5-inch drives can also be attached to the power supply cover, or two more brackets can be purchased (GEFD-090). Then there are four 2.5-inch drives in the case.

The I / O panel is attached to the top of the elegant case. The panel features a USB 3.1 Type C, two USB 3.0 ports and two audio jacks, as well as the beautifully designed power button and an unobtrusive status LED. Three Fractal Design Dynamic X2 GP-140-mm fans provide a very strong airflow from the factory and remain very quiet. Up to six additional fans can be mounted in the lid, front and floor. The magnetic dust filter on the lid can be replaced with a solid cover with sound insulation.

Technical details:
- Dimensions: 233 x 465 x 538 mm (W x H x D)
- Material: steel, plastic, glass
- Weight: approx. 9.5 kg
- Color: white, black
- Form factor: E-ATX, ATX, Micro-ATX, Mini-ITX
Total possible fan:
- 3x 120/140 mm (front)
- 1x 120/140 mm (back)
- 2x 120/140 mm (floor)
- 3x 120/140 mm (cover)
Preinstalled:
- 2x 140 mm (front)
- 1x 140 mm (back)
- Dust filter: front, bottom, lid
Radiator Mountings:
- 1x max. 280/360 mm (front)
- 1x max. 120 mm (back) - max. 125 mm width
- 1x max. 360/420 mm (cover)
- 1x 240/280 mm (floor)
Drive Bays:
- 3x 3.5 / 2.5 inches (internal)
- 2x 2.5 inches (internal)
- Power supply: 1x standard ATX (optional) up to 300 mm in length
- Expansion Slots: 7 + 2
I / O panel:
- 1x USB 3.1 type C
- 2x USB 3.0
- 1x each HD Audio In / Out
- Maximum CPU cooler height: 185 mm
- Maximum graphics card length: 440/465 mm (with front fan / without front fan)