Fractal Design Meshify C Midi-Tower - black [FD-CA-MESH-C-BKO-TG]

 Thanks to the mesh elements, the Meshify C knows how to enjoy a good airflow in the interior of the Midi-Tower and can also record potent gaming hardware and large dual and triple radiators. But also the high-quality Tempered Glass side panel contributes to the high-quality of the Midi-Tower.
The Fractal Design Meshify C Midi Tower at a glance

Elegant design with large mesh surfaces - optimized for high airflow
Breathtaking view of the hardware through tempered glass side panel
Space for a 280/360 mm radiator in the front
Space for a 240 mm radiator in the lid
2x 3.5 "HDDs & 3x 2.5" SSDs & 7 slots for expansion cards
7 fans possible - 2x 120 mm pre-installed
CPU coolers up to 170 mm & graphics cards up to 315 mm (with mounted front fans)
Frontpanel with 2x USB 3.0 & Audio In / Out
The Fractal Design Meshify C Midi-Tower in detail

A large mesh surface dominates the front of the Fractal Design Meshify C Midi-Tower and the asymmetrical diamond structure of the metal grating creates an impressive 3D effect. Behind the front, a 280 mm or 360 mm radiator can be installed and alternatively there are two 140 mm fans or three 120 fans. A dual radiator with a length of 240 mm can be installed in the cover, whereby the maximum component height in the upper area of the mainboard is then 40 mm.

Graphics cards may be up to 315 mm long with the front fans installed. CPU coolers can be installed in the Fractal Meshify C with a height of up to 170 mm, power supplies may be up to 175 mm long. In addition to ATX, Micro ATX and Mini ITX motherboards, up to seven expansion cards can be installed in the enclosure. Two mounting points for 3.5-inch drives are housed in the cable chamber, which is also available with 2.5-inch copies. In addition, there are three dedicated 2.5-inch installation slots directly on the back of the mainboard tray.

The I / O panel is attached to the top of the elegant case. On the panel are two USB 3.0 ports and two audio jacks as well as the nicely designed power button and an inconspicuous status LED. Two Fractal Design Dynamic X2 GP-12 120mm fans provide a very strong airflow at the factory and remain very quiet. Up to five additional fans can be installed in the lid, front and floor.

Technical details:
Dimensions: 217 x 440 x 395 mm (W x H x D)
Material: steel, plastic, glass
Weight: approx. 6.5 kg
Color: matt black
Form Factor: ATX, Micro-ATX, Mini-ITX
Total fan possible:
3x 120 mm or 2x 140 mm (front)
1x 120 mm (rear side)
1x 120 mm (ground)
2x 140/120 mm (cover)
Pre-installed:
1x 120 mm (front)
1x 120 mm (rear side)
Filter: front, bottom, cover
Radiator mountings (with partial absence of fan / front rail / HDD cage):
1x max. 280/360 mm (front)
1x max. 120 mm (rear side) - max. 125 mm width
1x max. 240 mm (cover) - max. Component height 40 mm
Drive Bays:
2x 3.5 / 2.5 inch (internal)
3x 2.5 inches (internal)
Power supply: 1x standard ATX (optional) up to 175 mm length
Expansion slots: 7
I / O panel:
2x USB 3.0
1x each HD Audio In / Out
Maximum CPU cooler height: 172 mm
Maximum graphics card length: 315 mm