The EVGA DG-87 is the largest stage of the DG-8, offering most of the features, which include an HDMI port on the front, a USB 3.1 Type-C port, along with a "K-Boost" button , Visually, the DG-87 lifts off from the "smaller" cases from his Metallic and is a real eye-catcher.
The features of the DG-87 Big-Towers at a glance:
Stylish Industrial Design
Optimized Airflow
Can accommodate up to 2x 420 mm radiator
Brackets for pump & reservoir
Front-HDMI & USB 3.1 Type C
Two I / O panels in front & Top
EVGA K Boost Button
Integrated Fan Controller & Temperature Sensor
EVGA DG-87: Gaming Tower Enthusiast
The DG-87 is special, you can already because EVGA changes the nomenclature of the pages. The large side with the Window is the front of the DG-87, the left and right side are the narrow sides of the Big-Towers. The motherboard tray is aligned so that the PCI aperture lying on the left side of gaming cases. For a fast and easy access to the hardware all sides can be opened.
The window in the front offers a view into the interior of the tower and the glossy panel on the right side of the window can be removed, so that this area if required can also be accessed. When viewed from the top to the DG-87, it can be seen that the front would be the short side of two parallel lines of a trapezoid.
Optimized for Custom Water Cooling: EVGA DG-87 Big-Tower
Potent gaming hardware can best be cooled with water. The DG-87 therefore supports the installation of a custom water cooling or a AiO-water cooling. The cover and the right side radiators can be installed up to a length of 420 mm to curb gaming systems with up to four water-cooled graphics cards and the processor respectively.
Right from the motherboard tray is a removable bracket for expansion tank (Terms) and pumps. Alternatively, the drive cages can be taken out on the ground next to the power supply, to make room for Terms and pumps. Additional radiators can be mounted in the left side of the door, but here can not use Hard Tubes.
EVGA DG-87: Discreet big tower with HDMI terminal for VR goggles
A great feature of the DG-87 is the fact that the back panel of the motherboard is in the housing and is concealed by the flap on the left side. is located on the back of a rubberised opening to guide the cables to the outside. An internally misplaced HDMI cable connects the HDMI connection in the front with the HDMI output of the graphics card. This feature makes the DG-87 particularly attractive for the connection of a VR glasses.
The motherboard tray also are several rubberized openings for premium cable management. Behind the motherboard tray to four 2.5-inch SSDs and two 3.5-inch HDDs are fixed. The two removable HDD cages offer three 2.5- or 3.5-inch disks each place.
Big-Tower with dual I / O panel and fan control: the DG-87 from EVGA
The DG-87 has two I / O panel. The cover each a power, reset, and K-Boost button and two USB 2.0 ports are housed. The front is equipped with a rich range of terminals, because in addition to two USB 3.0 ports and a USB 3.1 Type-C port here is the aforementioned HDMI port. In addition, the front panel has a respective power, reset, and K-Boost button and two audio ports.
The displays of fan controller indicates the fan rotational speeds of the air-breathing fan and out-blowing fans and allows adjusting the fan rotation speeds. In addition, the internal temperature of the tower can be displayed. The EVGA "K-Boost" button, the Windows Power Management to Maximum to adjust CPU and GPU on the highest possible performance.
Technical details:
Dimensions: 686 x 642 x 270 mm (W x H x D)
Weight: 19.6 kg
Material: steel (chassis), aluminum (3mm; front, cover, pages)
Color: Silver (Metallic Gunnmetal Grey), Black
Form Factor: E-ATX, ATX, Micro-ATX, Mini-ITX
Fan total possible:
2x 120/140 mm (left side)
3x 120/140 mm (Right side)
3x 120/140 mm (lid)
Of preinstalled:
2x 140 mm (left side)
3x 140 mm (Right side)
1x 140mm (lid)
Radiator Mountings (partial waiving HDD and / or fan slots):
1x max. 420/360 mm (Right side)
1x max. 280/240 mm (left side)
1x max. 420/360 mm (cover)
Remove: Right side, PSU (removable)
Drive Bays:
8x 2.5 / 3.5 inch (internal)
4x 2.5 inch (internal)
PSU 1x standard ATX (optional)
Expansion Slots: 9
I / O panel:
1x Power (Top & Front)
1x reset (Top & Front)
1x USB 3.1 Type C (Front)
2x USB 3.0 (front)
2x USB 2.0 (Top)
1x HDMI (Front)
1x K-Boost (Top & Front)
1x per Audio In / Out (Front)