EK Water Blocks EK-FC Terminal DUAL Parallel 3-Slot - Plexi [3831109869369]

EK Water Blocks provides for its own VGA cooler also on these options. Here, the watercooling specialist shows an outstanding diverse range required for dual and triple systems includes not only matching models, but also one version with parallel and includes a serial flow.

Common to all is a basic body, here made of sturdy, transparent acrylic glass. In contrast to the bridge variants of this terminal can be connected directly to the respective graphics cards. An additional link is not necessary. This makes the use very easy. However, the terminal can only be used with the updated design CSQ (about the EK-FC Titan).

This is a dual-port terminal can be connected to the corresponding two graphics cards. As a special 3-slot version, this is specified for larger distances between the cards (60.9 mm slot spacing). It is therefore essential to make the distribution of the PCIe slots used motherboards.

The flow of this bridge is parallel. It therefore pull up to the amount of two tubes through the connecting piece, on the one hand, the water is supplied, dispersion and also flows through both VGA cooler and discharged on the other side of the debate again. Advantage: Both get so uniformly cold water. Disadvantage: However, with less pressure.

Notes: Before you buy, whether its VGA cooler is supported by EK Water Blocks. The terminal can not be used with the coolers of the original CSQ-series.

Technical details:

     Material: Acrylic
     VGA cooler connectors: 2x
     Ports distance: 60.9 mm
     Circuit: parallel
     Thread: G1 / 4 inches
     compatibility:
     z. B. EK-FC Titan (more compatibility check with the manufacturer)
     NOT compatible with full cover water coolers in the original CSQ Design.