EK Water Blocks EK-DDC Dual 3.2 PWM X-TOP Including Pumps [3831109842980]

EK dual PWM DDC 3.2 X - TOP is a lid which is equipped with the same two pumps of the type EK DDC 3.2 PWM. One uses two pumps in a watercooling system, which has the advantage of an almost double flow rate . But even if time should fail a pump , the other pump could continue to be used , which prevents overheating damage to its own hardware .

DDC 3.2 PWM pumps are equipped with an electronic motor ball , which is retained in the pump by means of a ball bearing. A single water pump reaches according to the manufacturer a flow rate of 1,000 l / h and a maximum head of 5.2 m.

Power is supplied via 4 pin Molex . In addition, the pump can be connected also to a PWM port , so that the speed of the pump can be regulated , so that only the power (and hence volume) is provided , which is also necessary.

The product is made ​​of high quality acetal and has two G1/4-Ports . To install it in an enclosure is supplied with a mounting bracket for 5.25 -inch slots and matching (partial vibration damping ) screws. The pumps are pre-installed in the top .

Technical details :
    Head: 2x 5,2 m
    Maximum flow capacity : 2x 1,000 L / h
    Operating voltage: 12 V
    Power : 2 x 18 Watt
    connections:
    4- Pin Molex ( power supply)
    4- Pin PWM Adapter
    compatibility:
    DDC -3.2 compatible reservoir from EK Water Blocks
    Scope of delivery:
    EK Water Blocks EK- DDC Dual 3.2 PWM X -TOP including pumps
    Mounting Bracket for 5.25 -inch slot
    screw
    User manual