EK-Loop D-RGB LED Magnetic Kit (4pcs 400mm) [3831109848531]

EK-Loop D-RGB LED kit (4pcs 400mm) connects to a PC motherboard or a D-RGB controller via a standard 3-pin 5V connector (+5V, Data, Blocked, Ground).

It has a density of 51LEDs/m with a total of 21 separately controllable LEDs on each of its four 400mm long strips. These strips can be daisy-chained which means you can connect multiple LED strips together for an extra-long lighting solution. The strips in the kit are connected between themselves via JST-SM connectors.

The primary form of mounting on a PC case is via magnets, but it also has a secondary option, an adhesive tape that can stick to any flat surface. It's utilized by removing the protective foil from the back of the strip. The strip is encased in a high-quality silicone housing improves light uniformity and protects the strip.

Technical data:

- Connection type: 3-pin (+5V, D, Blocked, Ground)
- Rated voltage: 5V DC
- Number of LEDs: 21 (51LED/m density)
- Strip length: 400mm- Number of LEDs: 33 (54LED/m density)

Enclosed:

- 400mm EK-Loop D-RGB LED Magnetic Strip (4pcs)
- JST-SM cables for daisy chaining (3pcs)
- 400mm D-RGB connector cable (2pcs)