Cryorig XT140 - 140mm, PWM, 700-1300rpm [CR-XTA]

The Cryorig XT140 at a glance:

    Powerful 140mm PWM fan for CPU cooler or enclosure
    Barely audible, even under load
    Efficient delivery volume of 130 m³ / h
    Rubberized decoupler corners in three colors
    Manufacturer's warranty up to 6 years

At 13mm, Cryorig's XT140 fans are only half as deep as most of its 140mm counterparts. With its 13 fins, the rotor of the XT-140 delivers a decent volume of up to 110 m³ / h at a maximum static pressure of 1.49 mm H2O, the fan delivers similar good results as larger 140 mm fans and is still included high speed barely audible. Because the XT140 has an extremely quiet bearing bearing. Thanks to this HPLN (High Precision Low Noise) bearing, the noise level is a quiet 24 dB (A).

As an effective anti-vibration measure in the XT140 fan four decouplers are embedded in the corners, which are enclosed in three colors. They can be used in black, red or white as desired. This dampens the vibration transmission of the fans to the fins of a CPU cooler or enclosure. Although the fan is designed specifically for use with Cryorig's CPU coolers, it can also be used as an efficient chassis fan that is hard to hear even under the toughest conditions.

If you register your product with Cryorig, you can extend the manufacturer's warranty from three to six years.

Technical details:

    Dimensions: 140 x 140 x 13 mm (W x H x D)
    Weight: approx. 89 g
    Material: Plastic
    Color: Gray (frame), Black (rotor)
    Connection: 4-pin (PWM)
    Speed: 700 ~ 1,300 rpm
    Volume: max. 24 dB (A)
    Delivery volume: max. 110 m³ / h
    Static pressure: max. 1.49 mmH2O
    Voltage: 12V
    Delivery:
    1x fan XT140
    1x Molex adapter
    4x standard fan screws
    4x rubber decoupler pins
    24x decoupler corners (black, red, white)
    Manufacturer's warranty: up to 6 years