Cryorig C1 low-profile CPU cooler [CR-C1A]

The team of experienced radiator and OC experts uses high-quality materials and novel combinations of individual components to get the most out of air coolers. At the same time, Cryorig attaches great importance to making the installation of its CPU coolers as easy as possible. The coolers from Cryorig, like this low-profile CPU cooler C1, also look dazzling.

The Cryorig C1 at a glance

    Low profile copper and aluminum CPU cooler for best cooling performance
    Specially arranged cooling fins ensure optimal removal of the residual heat
    Suitable for processors with up to 140 Watt TDP
    Height: 74 mm
    Compatible with all common AMD and Intel sockets
    Uncomplicated installation

Optimized output air flow ensures optimized cooling

Cryorig's low-profile C1 CPU cooler uses six 6mm-thick sintered copper heatpipes that connect the nickel-plated copper bottom plate to the heatsink fins. The special feature is the design of the slats of the low-profile cooler. The cooling fins of the front area are 2.4 mm apart and the rear ones are only 1.8 mm apart. These different distances ensure an optimized output air flow. Cryorig calls it the Jet Fin Acceleration System. Thus, the heated air can be derived faster from the tower cooler. In addition, the heat pipes and fins are welded together in a special soldering process, so that there is ten percent more surface contact.

The Cryorig C1 comes with the slim XT140 fan. This fits the 74 mm high cooler in almost every ITX case. Under the fan remain 42 mm space for RAM modules. As an effective anti-vibration measure in the enclosed fan four rubber dampers are embedded in the corners. This dampens the vibration transmission of the fan to the slats. The fan itself has an exceptionally quiet bearing, so that the noise of the entire cooler at a quiet 44 dB (A). Thanks to its outstanding performance and efficiency, the twin-tower cooler is suitable for processors with up to 240 watts TDP (Thermal Design Power).

Especially clever is the easy assembly. The backplate is fixed by hand with knurled screws. Then come the support frame for the respective CPU, which is also fastened with knurled screws. With the enclosed screwdriver, the heat sink is then screwed tight. Thermal grease and a cloth to remove remains is included.

If you register your product with Cryorig, you can extend the manufacturer's warranty from three to six years.

Technical details:

    Dimensions: 140 x 74 x 144.5 mm (W x H x D)
    Mass:
    Without fan: 539 g
    With fan: 628 g
    Material: nickel-plated, sintered copper (bottom plate, heatpipes), coated aluminum (lamellas)
    Color: silver, black
    Heatpipes: 6x 6 mm
    TDP: 140W
    Fan: 1x 140 mm XT140
    Color: Black
    Connection: 4-pin PWM
    Speed: 700 to 1,300 rpm
    Volume: 24 dB (A)
    Delivery volume: max. 130 m³ / h
    Static pressure: max. 1.49 mm H2O
    Compatibility:
    Intel Socket 775, 1150, 1151, 1155, 1156, 1366, 2011, 2011-V3, 2066
    AMD socket FM1, FM2, FM2 +, AM2, AM2 +, AM3, AM3 +, AM4 (with extension kit)
    Maximum RAM height: up to 42 mm
    Manufacturer's warranty: up to 6 years