Cougar Turret Midi Tower, tempered glass - black [385QMY0.0001]

The Cougar Turret Midi Tower at a glance:
- Large side panel made of tempered glass & transparent front
- Two pre-installed LED fans; six slots available
- I / O panel with 2x USB 3.0, 1x USB 2.0 & HD audio
- 2x 2.5-inch and 2x 3.5 / 2.5-inch slots
- Space for motherboards in Mini-ITX, Micro-ATX & ATX form factor
- Extensive water cooling support

Lush space and smart details in the Cougar Turret
The motherboard may have the Mini-ITX, Micro-ATX or ATX format in this case and can simultaneously accommodate CPU cooler with a height of up to 160 mm and up to three dual-slot graphics cards with a length of 350 mm each , A power supply cover also provides a tidy look that separates the power supply from the rest of the hardware. There is plenty of room for cable management on the back of the mainboard tray, and there are four 2.5-inch drives on or under the PSU Shroud, of which two can be replaced by 3.5-inch versions.

Air and water cooling options
A high-performance gaming system should be cooled well and as quietly as possible, which is why the Cougar Turret offers numerous mounting locations for cooling components. Up to six fans can be installed inside the case, which means there are always enough cooling reserves available for powerful gaming hardware. Two 120 mm fans with red LED lighting, which are already installed on the front, ensure good airflow out-of-box.

Additional 120 mm fans can be installed in the cover and on the rear if required. Of course, up to three radiators can be used for water cooling, one of which may be up to 360 mm in size. In order not to let the valuable components sink in the dust, Cougar equips the turret with a total of two magnetic dust filters.

Cougar Turret: Futuristic design with precious tempered glass components
The Midi Tower is equipped with a large tinted tempered glass panel. In conjunction with the transparent and bevelled front, this provides a generous view of the installed hardware, which is discreetly illuminated by the red LED lighting of the fans. Above the front there is the I / O panel, which is equipped with fan control, two USB 3.0 ports, a USB 2.0 counterpart, HD audio ports and a power & reset button.

Technical details:
- Dimensions: 206 x 461 x 420 mm (W x H x D)
- Material: steel, tempered glass, plastic
- Color: Black
- Form factor: Mini-ITX, Micro-ATX, ATX
Total fan possible:
- 3x 120/140 mm (front)
- 2x 120/140 mm (cover)
- 1x 120 mm (back side
Preinstalled:
- 2x 120 mm (front, red LEDs)
- Radiator mountings (waiving fan slots):
- 1x 120/240/360 mm (front side)
- 1x 120/240 mm (cover)
- 1x 120 mm (back)
- Dust filter: bottom / lid
Drive Bays:
- 2x 2.5-inch
- 2x 3.5-inch (also usable for 2.5 inches)
- Power supply: 1x standard ATX (optional)
- Expansion Slots: 7
I / O panel:
- 2x USB 3.0
- 1x USB 2.0
- 1x each audio in / out
- Power On / Off Switch
- Reset button
- Maximum graphics card length: 350 mm
- Maximum CPU cooler height: 160 mm