Five models cover gen entire power range from 550 to 1,000 watts from continuous output. Who does not need a software interface such as Corsair Link is replaced with the RMX-mode power supplies very similar technology at a lower price. The offered 1,000-watt model is the most powerful version of the series and is aimed at operators of absolute high-end systems.
High-quality technology in noble-simple design with high functionality, that is the principle with respect to the external design of the RMX. With the exception of the black-white sticker on the side of the power supply is designed decently. A large 135 mm fan ensures adequate cooling of the electronics and is also controlled according to the heat generation, resulting in an additional gun barrel bearings (Rifle bearing) ensures permanently smooth and quiet operation. Below a power output of about 400 watts, the fan also does not rotate, the Corsair PSU is thus semi-passive designed to work completely silent at idle. The efficiency achieved on average a 50 percent utilization at least 90 percent, therefore, it was awarded the "80 Plus Gold" certificate.
Despite lower compared to hxi and RMi price Corsair does not skimp on the electronics: With DC-DC voltage conversion is beyond the voltage regulation beyond any doubt. The output voltages are even in demanding scenarios such as full load or asymmetrical load is always close to the setpoint. The components are employed also on quality: There are only 105 degrees Electrolytic Capacitors Japanese makes and polymer solid capacitors used. These are regarded as particularly durable. Whole Seven years warranty showing confidence in the brand RMX series.
With 850 watts of total power and up to 100 percent performance on the + 12-volt single-rail are supplied permanently and stable power to the RMX 1000 most demanding of systems, including two high-end graphics cards. In order to make this enormous power and every instrument available, the RM1000x offers enough connections. All connectors are designed modularly as a black ribbon cable and are connected only when needed with the power supply - free air flow for optimum cooling of all components. In addition to the 20 + 4-pin connector and the 4 + 4-pin port for powering the motherboard and CPU are available eight 6 + 2-pin PCIe plugs for the graphics card. With twelve SATA and eleven 4-pin Molex and two floppy connectors, all systems in this performance class without an adapter-craft solutions can operate.
Dimensions: 150 x 86 x 180 mm (W x H x D)
Weight: 1.66 kg
Fan: 135 mm (automatic control, semi-passive)
Efficiency: min. 90/87/87% at 50/20/100% utilization (115V, efficiency in the European 230-volt power is slightly higher), including 80 Plus Gold certificate.
Form Factor: ATX12V 2.4 / EPS 2.92
Power: 1.000 W
+ 3.3V: 25A
+ 5V: 25A
+ 3.3V & + 5V: 150W
+ 12V: 83.3 A / W 1000
-12V: 0.8A / 9.6W
+ 5Vsb: 3 A / 15 W
1x 20-pin ATX + 4
1x 4 + 4-pin EPS12V / ATX12V
8x 6 + 2-pin PCIe
11x 4-pin Molex
Manufacturer Warranty: 7 years