Corsair LL140 Node Pro High Performance PWM Fan (RGB) Twin Pack incl. Controller - 140mm [CO-9050074-WW]

The speed range between 600 and 1,300 rpm allows either whisper-quiet operation or outstanding cooling performance. The transparent fan with its 16 integrated RGB LEDs also provides a stunning visual effect, especially as both the outer ring and the hub of the rotor are illuminated. Never before has a case been staged so stylishly!

The Corsair LL140 High Performance RGB Fan Overview:

    Magnetic bearing ensures high performance, quiet operation and long life
    Custom red leaves deliver the perfect balance between pressure and airflow
    RGB LED lighting with 16 individual LEDs & stylish effects
    Speed range from 600 to 1,300 rpm
    4-pin PWM connector
    Includes RGB controller Lighting Node PRO and 6-port hub

Powerful fan with stylish lighting

The LL140 High Performance RGB fan is equipped with high-end technology and ensures a high contact pressure of up to 1.52 mm H2O, thanks to the special rotor design, and delivers a maximum delivery volume of 88.3 m³ / h. The sophisticated hydraulic bearings also ensure a high level of performance and are extremely durable. In addition, it only produces a low volume of 25 dB (A), depending on the fan speed.

The 14-centimeter fan also features rubberized support points for a perfect, low-vibration run and an outstanding impression thanks to the black contrast. A special highlight of the LL140 RGB is, of course, the extraordinary lighting in the form of 16 individually illuminated LEDs in a double loop. Not only the outer ring of the rotor, but also the hub are provided with the bulbs. Both light loops can be individually adjusted in color, effect and speed of the effect according to the wishes of the user. Respiratory, stroboscope or color change effects are available.

For the configuration of the fan this article contains the practical RGB controller Lighting Node PRO, over which the attitudes can be comfortably selected. In addition, Corsair will add a 6-port hub. The fan is connected by means of 4-pin PWM cable and thus completely automatically controlled by the PWM signal.

Technical details:

    Fan:
    Dimensions: 140 x 140 x 25 mm (L x W x D)
    Material: plastic (and rubber)
    Volume: 25 dB (A)
    Speed: 600 - 1,300 rpm +/- 10%
    Delivery volume: 88.3 m³ / h
    Air pressure: 1.52 mm H2O
    Lighting: 16x RGB LEDs
    Operating voltage: 7 - 13.2 V
    Connection: 4-pin
    RGB Controller:
    Dimensions: 55 x 31 x 12 mm (L x W x D)
    RGB LED channels: 2
    Power consumption: 4.5V to 5.5V
    Delivery:
    2x fan Corsair LL140 High Performance RGB
    1x RGB controller Lighting Node PRO
    1x 6-port RGB hub
    2x hub adapter cable for fans
    1x mini USB cable
    2x mounting rails
    for Lightning Node Pro
    8x fan mounting screws