From the beginner and system builder series to the absolute high-end streamers for gamers and enthusiasts, virtually everyone finds the right product.
The HX series is then very clear to the demanding user. These power supplies combine almost all the features in the field of power supply construction. Special features of this Corsair power supply series are the use of high-quality Japanese capacitors, a fully modular cable management system, with 90% very high efficiency, high processing quality and a ten-year warranty.
With a depth of 20 cm, the HX1200 has a handsome appearance and should find its way into a suitably dimensioned housing. With the exception of the black and white label on the side, the power supply is subtle. A large 135 mm fan ensures sufficient cooling of the electronics and is also controlled depending on the heat development. In addition, a hydrodynamic plain bearing ensures quiet and quiet operation.
The efficiency reaches an average of more than 93% on a 50% load, therefore it has been awarded the 80Plus Platinum Certificate. With 1,200 watts of power, even the most demanding quad-VGA configurations with a wide range of peripherals are supplied. In contrast to most PSUs, Corsair does not rely on a multi-split 12V line, but on a single, particularly strong line. Specifically, 100 amperes of current and 1,200 watts are available. Even a combination with several high-end graphics cards is therefore no problem.
The HX1000 offers enough connections to make this enormous performance available to every device. In addition to the 20 + 4-pin connector and the two 4 + 4-pin ports for the mainboard and CPU, eight 6 + 2-pin PCIe are available for the graphics types. With eight SATA and eight 4-pin Molex, most home and gaming systems can accommodate higher memory requirements, as well as add additional components: fans, water pumps, front panels, and so on. In addition, a floppy connection is available.
Thanks to fully-modular cable management, only the required cables are connected. This ensures order in the PC interior and at the same time improves the cooling, since less air turbulence is caused by hanging cables and so hinders the airflow.
Dimensions: 150 x 86 x 200 mm (W x H x D)
Fan: 135 mm (automatic control, with ZeroRPM mode)
Efficiency (230 V): Max. 93% (50% load), incl. 80Plus Platinum certificate
Form Factor: ATX12V 2.4 / EPS 2.92
Active PFC (0.99)
Warranty: 10 years
(OVP), undervoltage protection (UVP), overload protection (OPP), overheating protection (OTP), overload protection (SCP)
Power: 1,200 W
+ 3.3V: 30A
+ 5V: 30A
3.3V + 5V = 150W
+ 12V: 100A (1,200W)
-12V: 0.8A (9.6W)
+ 5Vsb: 3 A (17.5 W)
Connections (fully modular):
1x 20 + 4-pin ATX
2x 4 + 4-pin ATX12V / EPS12V
8x 6 + 2-pin PCIe
8x 4 pin Molex