Corsair Cooling Hydro Series H80i V2 complete watercooling [CW-9060024-WW]

However, all compact watercooling systems combines the basic structure: They consist of two parts - the radiator and the heat sink. is mounted on a 120mm fans slot During the radiator in H80i V2, place the cooler on the CPU space. In the housing of the cooler, the pump and the expansion tank are already installed. Since it is a closed circuit, the system does not require maintenance.

The bottom of the heat sink absorbs the heat from the processor and passes it through copper base plate efficiently to the water on. This in turn is pumped by the pump direction radiator, where the cooling liquid flows through a fine lamellar structure and transfers heat to the air flowing through. The fan again ensures that the radiator is constantly supplied by fresh air. Compared to the previous model, the H80i V2 has been further optimized, now looks a little fancier and now has jacketed hoses.

The H80i V2 has two very powerful fan from the Corsair Air Series, more precisely, two SP120L PWM. These are optimized for a high static pressure, which is important for the operation together with a radiator. These offer specially made blades in the 120-mm fans a better relationship between the static pressure and noise and thus higher performance at a lower noise than ordinary fans. By the push-pull configuration, a higher performance is possible than with only one fan. The fans are connected via the included Y-cable directly to the pump unit. It receives its power via an additional SATA power connector.

Of the other i-models from the Corsair Hydro Series known is the Corsair Link feature - simply the attached Corsair Link cable to connect to a USB header on the motherboard and download the free Corsair Link Dashboard software. Thus, the coolant temperature can be monitored by the application and the cooling performance can be controlled. The software also permits the adjustment of color effects, because the Corsair logo on the pump using RGB LEDs in every conceivable color and for example, depending on the coolant temperature can be illuminated.

Especially in compact enclosures can be used Tower cooler space reasons mostly not. In the case of H80i V2 only the flat cooler must sit directly on the CPU. The radiator can be installed in compliance with the hose length shall be free at a corresponding slot.

The mounting system of H80i V2 is suitable for the LGA 1150, 1151, 1155, 1156, 1366, 2011 (-3), AM2 (+), AM3 (+) and FM1 and FM2 (+). The tool-free magnetic mounting brackets in modular design for easy installation. Pre- applied thermal paste to the cooler base.

Technical details:

    Dimensions (radiator): 154 x 123 x 49 mm (L x W x H)
    Dimensions (fan): 120 x 120 x 25 mm (L x W x H)
    Fans: 1x 120mm
    Volume: max. 37.7 dB (A)
    Speed: max. 2,435 +/- 10% U / min
    Air juice: max. 120.1 m³ / h
    Pressure: max. 4.65 mm H2O
    Compatibility:
    Intel LGA 1150, 1151, 1155, 1156, 1366, 2011 2011 V3
    AMD AM2, AM2 +, AM3, AM3 +, FM1, FM2, FM2 +
    features:
    Complete water cooling system with easy installation
    Pre-charged and maintenance-free
    High cooling capacity
    Static Pressure 120 mm fan
    Corsair Link software fan controller
    High compatibility